vk800 problem after flashing

[bingo_888]

pls help me with my vk800, after i flash the phone it becomes blinking.

the phone power on before i flash it. the problem is camera cannot save and tones disappear.

now the phone wont power on.

infinity team please help me with this problem

[bingo_888]

pls help me with this one

[bingo_888]

infinity team why the phone is blinking after i flash. the phone powers on before... help please

[InfinitySupport]

Hello,

Did you tried to use different flash files from support area ?

[bingo_888]

tnx for the reply sir, yes i tried all from support site.


here is the log:

Loading file v.02...
VK800_Main_VK800Z20_HZ2.91R_2005-Jul-19_Thai.4CM.bin Loaded
Loading file v.02...
VK800_repair_eeprom_01.4CF.bin Loaded
COM5 selected
Device: VK207i
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Err: boot error[02]
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
Current model: VK800
Loading file v.02...
VK800_Main_VK800Z20_HZ2.91R_2005-Jul-19_Thai.4CM.bin Loaded
Loading file v.02...
VK800_repair_eeprom_01.4CF.bin Loaded
Loading file v.02...
VK800_Main_VK800Z20_HZ2.91R_2005-Jul-19_Thai.4CM.bin Loaded
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Err: boot error[02]
Boot Fail
Finished, time used: 12 sec
Remove/Install battery now !
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Err: boot error[02]
Boot Fail
Finished, time used: 35 sec
Remove/Install battery now !
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Err: boot error[02]
Boot Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Err: boot error[02]
Boot Fail
Finished, time used: 14 sec
Remove/Install battery now !
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Write: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
406250
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0001:227E
flash: Amd 41DL640G/29DL640G D 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 0001:227E
startup mode adjusted
flash: Amd 41DL640G/29DL640G D 8Mb
Flash: 0001:227E
startup mode adjusted
flash: Amd 41DL640G/29DL640G D 8Mb
Write: FFS/File system
flash: Amd 41DL640G/29DL640G D 8Mb
Writing Done
Finished, time used: 970 sec
Remove/Install battery now !
COM5 selected
COM5 selected
Device must be POWERED-ON !
Connecting, wait...
Err: can't read software version
Err: can't read hardware version
Err: Phone not powered or bad connection
Err: operation not finished properly
Finished
Loading file v.02...
VK800_repair_eeprom_01[1].4CF.bin Loaded
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Skip: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
406250
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0001:227E
flash: Amd 41DL640G/29DL640G D 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: FFS/File system
Flash: 0001:227E
flash: Amd 41DL640G/29DL640G D 8Mb
Writing Done
Finished, time used: 77 sec
Remove/Install battery now !
Loading file v.02...
VK800_repair_eeprom_02.4CF.bin Loaded
COM5 selected
Device: VK800
Checking data, wait...
Action: Flash write
Smart Write active
Skip: Firmware
Write: FFS/File system
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
406250
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0001:227E
flash: Amd 41DL640G/29DL640G D 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: FFS/File system
Flash: 0001:227E
flash: Amd 41DL640G/29DL640G D 8Mb
Writing Done
Finished, time used: 144 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

Try to make this:
1. run HModule.exe
2. select models "Hercules 16m"
3. load VK800 flash file
4. flash phone
let's see results

[bingo_888]

cannot flash sir
here is the result

COM5 selected
Device: Hercules 16m
"advanced chip detection" active
Action: flash write
"smart write" active
Write: Firmware
Skip: Flex
Skip: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Skip: Eeprom
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot fail
Finished, time used: 9 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

1. try to press and hold phone "Power" button long time during boot procedure
2. if phone lost tones without any reason it may be hardware problem (not sure but it may be so), it may be problems with flash chip.

[bingo_888]

sir i did that already but with same result