please help with pinOUT FOR N95 8GB RM 145

[ysmayl]

please help with pinOUT FOR N95 8GB RM 145

[thanhhieuqb]

infinity not support for nokia bb5

[ysmayl]

isi` t a china mobile bro not original nokia i`am noot stupid wach my picture

[ysmayl]

heer is better picuture

[InfinitySupport]

Hello,

What is phone bottom connector type ?

[ysmayl]

mini usb cable L3A pin finder

[InfinityHelp]

hello!

do you have pinfinder?
run search for handsfree port and miniusb5 pin port.
if both of them will fail- pinout is hidden in test points.
them i would advice to check with multimeter

[pepenk]

hello!

do you have pinfinder?
run search for handsfree port and miniusb5 pin port.
if both of them will fail- pinout is hidden in test points.
them i would advice to check with multimeter

sir do you get pinout for this phone ?? please

[pepenk]

COM1 [VCP0] selected
module v2.74
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:BB62:30AE
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2C0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.FCCF6950.[N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN_506F6747].rpl
New firmware detected (2.74) :
N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: FCCF6950
identification#1 protocol ver: 04
ver. sw 1: N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN
ver. sw 2: MAUI.06B.W07.04.MP.V32, B89890AF
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:2CEA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
..................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok: element #1
detecting ffs/eeprom structure pass 2...
..................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok element #2
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_FCCF6950_N95_PCB01_GPRS_MT6226_S01.MAUI_ 06B_W07_04_MP_V32.BIN_506F6747_20090218-120910.B0X.bin
Finished, time used: 89 sec
Remove/Install battery now !

[InfinityHelp]

hello!

i will include this pinout to our pinout collection, thank you!

[gilbertz]

hello sir.. can u help me... i need firmware for it. thanks

[InfinityHelp]

hello sir.. can u help me... i need firmware for it. thanks

hello!

firmware is available on our support site.
Are you sure that you need to flash your phone?
maybe format FFS is enough?

[sugiharto]

thaks bro,for share this picture,i have tested this pin out