PDA

View Full Version : W200 red blink

shuric
10-06-2008, 03:59
Dreambox can repair red blinking W200?
Setool log:

TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35970701020146 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
SETOOL2 CAN'T FIX THAT PHONE
PLEASE FLASH MAIN PART OF FIRMWARE AND RETRY
Elapsed: 2 secs.
shawgsm
10-06-2008, 04:12
yes it can be repaired by test point & repair gdf

br
hackerbd
10-06-2008, 14:43
Yes you can repair it with security bypass with Dream Box.
shuric
10-06-2008, 16:05
why send result by setool?

Because I do not have a dreambox, there is only a setool.
DYNET
10-06-2008, 19:57
because i do not have a dreambox, there is only a setool.


yes dream box can do it
it's gdfs strukchur proble
try with dream box

br.dynet
samsoft
03-13-2009, 08:10
-- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355441-01-177267-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Processing ... \
Hint : Now the probe might be disconnected

Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Unlock and Repair----------------------------------------------------------
User selected phone W200 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
Timeout detected
Error : Please execute "Security Bypass" operation first
Error : Failed.

--- Reading Info---------------------------------------------------------------
User selected phone W200 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355441-01-177267-7
OTP CID = 51
EROM Color = FFFFFFFF : UNKNOWN
EROM CID = <unknown>
Error : Invalid GDFS and/or configuration.
Hint : Try to flash firmware.
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355441-01-177267-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Processing ... |Warning : Possibly wrong pin connected
/
Hint : Now the probe might be disconnected

Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
Baseband Chip ID = 8040
Phone ID = 2380716C1530472B
Finalizing ...
Stage 2 completed succesfully
Done.

--- Unlock and Repair----------------------------------------------------------
User selected phone W200 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 53
Baseband Chip ID = 8040
Phone ID = 2380716C1530472B
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.
hamed_karamouz
03-20-2009, 04:13
Because I do not have a dreambox, there is only a setool.

here is dream box forum if you want solve your problem by other tool please post your log there
sniper007
03-20-2009, 13:36
check this out.

http://forum.gsmhosting.com/vbb/showthread.php?t=698255