New firmware detected: Successfull format:

[Shakeel_pattoki]

==== log: [10/6/2008 10:32:08 AM] ====
COM22 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:8E41:5A18
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.55F63B63.[JR_HY_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_JR_CN_ 08_GC.BIN_1E37AB1E].rpl
====================
New firmware detected:
JR_HY_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_JR_CN_ 08_GC.BIN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 55F63B63
identification#1 protocol ver: 05
ver. sw1: JR_HY_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_JR_CN_ 08_GC.BIN
ver. sw2: MAUI.06A.W06.40.JR.CN.08.GC, E154C8E1
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[JR_HY_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_JR_CN_ 08_GC.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[JR_HY_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_JR_CN_ 08_GC.BIN]_20081006-103622.B0E.bin
flash: 01227E22202200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:2BEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_55F63B63_JR_HY_PCB01_GPRS_MT6226_S01.MAU I_06A_W06_40_JR_CN_08_GC.BIN_1E37AB1E_20081006-103644.B0X.bin
Finished, time used: 258 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[kikikokoki]

wow okey sir.....................

[Shakeel_pattoki]

Connector type 6x2=

COM22 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C73B:B102
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.1E54AC87.[M200DS4_PCBV1_1_GPRS_MT6226_S01.MDS4_CEFARVG_7N_P3 0_V03.BIN_3B66C35A].rpl
====================
New firmware detected:
M200DS4_PCBV1_1_GPRS_MT6226_S01.MDS4_CEFARVG_7N_P3 0_V03.BIN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 1E54AC87
identification#1 protocol ver: 04
ver. sw1: M200DS4_PCBV1_1_GPRS_MT6226_S01.MDS4_CEFARVG_7N_P3 0_V03.BIN
ver. sw2: MDS4_CEFARVG_7N_P30_V03, A53C99C4
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
detecting languages...
..........................................
language parameters detected
detected languages: En Ru Fr De Vn Cn Ar
Check firmware content Done
Backup required data...
reading: eeprom[M200DS4_PCBV1_1_GPRS_MT6226_S01.MDS4_CEFARVG_7N_P3 0_V03.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[M200DS4_PCBV1_1_GPRS_MT6226_S01.MDS4_CEFARVG_7N_P3 0_V03.BIN]_20081006-115455.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_1E54AC87_M200DS4_PCBV1_1_GPRS_MT6226_S01 .MDS4_CEFARVG_7N_P30_V03.BIN_3B66C35A_20081006-115514.B0X.bin
Finished, time used: 260 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[Shakeel_pattoki]

http://img183.imageshack.us/img183/3001/screenshot12fn7.jpg (http://www.imagehosting.com/)

[InfinityHelp]

hello!

all new firmwares are welcome in mt62xx@gmail.com

[Shakeel_pattoki]

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F12E:3502
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.AE05CD04.[D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN_B88F9F72].rpl
====================
New firmware detected:
D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: AE05CD04
identification#1 protocol ver: 04
ver. sw1: D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN
ver. sw2: GM699-V01-2008-03-31, 8D607047
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
detecting languages...
....................................
language parameters detected
detected languages: En Farsi Ar
Check firmware content Done
Backup required data...
reading: eeprom[D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN]...
file saved: I:\(2) Ufs Flasher files\Infinity Box\Backup\eeprom[D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN]_20081027-130203.B0E.bin
flash: EC257E25082501:2AEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_AE05CD04_D421_05C_PCB01_GPRS_MT6226_S01. GM699-V01-2008-03-31.BIN_B88F9F72_20081027-130308.B0X.bin
Finished, time used: 500 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[InfinitySupport]

Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

Please, always follow the instruction:
====================
New firmware detected:
D421_05C_PCB01_GPRS_MT6226_S01.GM699-V01-2008-03-31.BIN
- make \"Read full flash\" operation
- send \"system_log_...\" file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================