PDA

View Full Version : china spl sigmatel


naimjapan
10-13-2008, 12:27
this is only 4 sigmatel phone section s1 s2 s3 etc....

naimjapan
10-13-2008, 12:37
s3 pins readed but not in booting

naimjapan
10-13-2008, 12:38
GND:6
VCC:11
spy and analyse define ->...
MTKchips connect to phone.
spy define success!RXD:2, TXD:3

naimjapan
10-13-2008, 12:48
GND:6
VCC:11
MTK pins status Read success!
spy and analyse define ->(auto double lines.)....
MTKchips connect to phone.
spy define success!RXD:5, TXD:8 12 pi

naimjapan
10-13-2008, 12:51
MTK CPU :6225
spy define success!RXD:7, TXD:6

naimjapan
10-13-2008, 13:02
TRICK FOR SIGMATEL FORMATING WITHOUT PC

hold power key 1 minute 10 sec...
with charge battry ..
ur set will formate & ask touch calibration ..
do that ur set is ok now without pc.
tested on sigmtel s3 s2 s4 s8 s9 just try

sachin3
10-14-2008, 07:49
this is only 4 sigmatel phone section s1 s2 s3 etc....

after flash my sigmatel S2 with spiderman box my handset is dead..
pls give me any solution.
& i dont Know Flash FIle Original NAme...
Help ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

:(:(:(:(
:(:(:(
:(:(
:(

naimjapan
10-14-2008, 08:22
bro wait 4 24hr i upload og file i hav it ok dontworry about it

naimjapan
10-14-2008, 09:26
formatt with xintel box ver. 4.7a all sigmatel

naimjapan
10-14-2008, 11:47
GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_0.bin

naimjapan
10-16-2008, 09:01
:GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S1-ML_MR106_004_5S02-MC-C01-RF3198_V1_1_025_

S 1 file name

naimjapan
10-16-2008, 09:27
GND:6
VCC:11
spy and analyse define ->.............._............._.....
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:5, TXD:8 sigmatel v88 pinout

naimjapan
10-16-2008, 09:32
SZMI25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_24.B IN
sigmatel v88 file name

naimjapan
10-16-2008, 10:39
hi all new phone repairer 4 china phone flash

""Donsonsmart"" box

easy n powerfull 4 u i'll chaked

with comzero soft


thanx 2 mtk-box team............................................

naimjapan
10-16-2008, 17:47
ttp://www.xintel.ru/Xintel-Box/index.php?dir=Xintel/MTK-Flash/

naimjapan
11-03-2008, 09:50
sigmatel s3 firmware

http://www.4shared.com/file/60762620/99629851/SIGMATEL_s3.html?s=1

naimjapan
11-03-2008, 09:51
sigmatel S 1 firmware

http://www.4shared.com/file/60762237/1914946f/sigmatel_s1.html?s=1

naimjapan
11-03-2008, 09:52
sigmatel s99 firmware

http://www.4shared.com/file/64672817/24c6ad3d/s9-sigmatel-6225-toshiba-tv0057800dabd.html?s=1

naimjapan
11-03-2008, 09:57
SIGMATEL_s4 flash file

http://www.4shared.com/file/60762803/38c38663/SIGMATEL_s4.html?s=1

naimjapan
11-03-2008, 09:58
SIGMATEL_s2 flash file


http://www.4shared.com/file/60762443/55b5ba03/SIGMATEL_s2.html?s=1

naimjapan
11-03-2008, 10:00
SIGMATEL_S70 flash file


http://www.4shared.com/file/69022500/d40f9721/SIGMATEL_S70_6223_TOSHIBA_L12B.html?s=1

naimjapan
11-03-2008, 10:01
all of u happy new yr

naimjapan
11-08-2008, 08:56
sigmatel s 90 flash file 1000% ok tested by meeeeeeeeeeeeeeee

http://www.4shared.com/file/69525286/3de00793/sigmatel__s90.html

naimjapan
11-08-2008, 08:58
sigmatel v88 flash file readed by me.....................100% ok

http://dc41.4shared.com/download/69565424/d80c5447/v88_full_ok_SZMI25_06B_PCB01_GPRS_MT6225_S00MAUI_0 6B_W07_24BIN.rar?tsid=20081108-015708-1a0d8f31

naimjapan
11-10-2008, 15:19
i found new flas file site if u like say tnx

http://www.gsm4yemen.com/support/index.php?dir=spiderman/SPIDERMANBOX/ARABIC_FLASHES_CHINESE/

naimjapan
11-13-2008, 11:50
sigmatel s3 flash file tested by me 100%ok

http://www.4shared.com/file/70667536/5b749175/sigmatel_S3.html

naimjapan
11-13-2008, 11:56
chaina A5 og flash file by meeeeeeeeeeeee........... if u like thnx me...........

http://www.4shared.com/file/71282253/cd03d308/A5_og.html

drmerajansari
11-13-2008, 12:05
thanx with regard....................

naimjapan
11-14-2008, 08:28
T99 sigmatel pinout by, naimjapan........... thnx me..........



GND:6
VCC:11
MTK pins status Read success!
spy and analyse define ->.._.._..
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:5, TXD:8

naimjapan
11-14-2008, 08:30
sigmatel T99 fls file og by meeeeee 100% ok..........

http://www.4shared.com/file/71420741/a3d72b9/t99_GINWAVE25_6416_06B_PCB01_GSM_MT6225_S00FXD-T99_FOREIGN_MR102_009_5S01-BYD-73-RFMD_V.html

naimjapan
11-14-2008, 12:14
S2 S3 hedsset solution 100% ok by mee..................

http://www.4shared.com/file/71429225/20c99c47/s3_headset_full_solution.html

akfrm
11-14-2008, 19:34
S2 S3 hedsset solution 100% ok by mee..................

http://www.4shared.com/file/71429225/20c99c47/s3_headset_full_solution.html

password for the rar file pl.

naimjapan
11-15-2008, 07:39
my all password is my name naimjapan

naimjapan
11-15-2008, 07:42
open with winrar n click on COMMENT's

naimjapan
11-17-2008, 08:57
post u r pro at all sigmatel we solved in 24hr just post........... n try 2 do.............. what v say..............

naimjapan
11-20-2008, 13:25
most powerfull flasher spl 4 sigmatel

ve mtk 4.7a i'm regularly use it sound is good

http://www.4shared.com/file/71445170/ea0468cc/vemtk_47a_EN.html

naimjapan
11-21-2008, 13:47
china s90 pinout n info

GND:8
VCC:1
MTK pins status Read success!
spy and analyse define ->.
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:7, TXD:6

CPU model :6225 ( HW_VER: 8A03 )
download Boot ...
boot File Ver.:04.02
NOR flash model :[TOSHIBA] TV00578002DABD
NOR flash size:01000000 (16.0M)
NOR flash ID code :00980049 (00000000) [92]
Int.RAM size:0000C000 (0.48M)
Ext.RAM size:00400000 (4.0M)

naimjapan
11-21-2008, 13:48
china s90 pinout n info

GND:8
VCC:1
MTK pins status Read success!
spy and analyse define ->.
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:7, TXD:6

CPU model :6225 ( HW_VER: 8A03 )
download Boot ...
boot File Ver.:04.02
NOR flash model :[TOSHIBA] TV00578002DABD
NOR flash size:01000000 (16.0M)
NOR flash ID code :00980049 (00000000) [92]
Int.RAM size:0000C000 (0.48M)
Ext.RAM size:00400000 (4.0M)

naimjapan
11-21-2008, 13:51
my mail id 1luv@in.com

naimjapan
11-27-2008, 09:31
s2 s3 hedset jumper solution by abhio1 tested okkk

http://www.4shared.com/file/73342448/de7468fe/_2__s2_s3__hedset_jumpuring.html

nitin28
11-27-2008, 18:40
help full sol sir......

naimjapan
11-28-2008, 11:14
media convert 4 china

http://www.4shared.com/file/72014239/2fd71bab/GPConverter.html

yandbass
11-28-2008, 15:08
s3 touchscreen calibration not working even after changing touchscreen and also byepass calibration failed in infinity. any hardware solution pls.

tks

naimjapan
11-29-2008, 09:57
s3 touchscreen calibration not working even after changing touchscreen and also byepass calibration failed in infinity. any hardware solution pls.

yandbass try this n post result


http://www.4shared.com/file/72014770/34aca4e0/tuch_ped.html

naimjapan
11-29-2008, 09:58
SIGMATEL s92 pin out n information


GND:1 2
VCC:11
MTK pins status Read success!
spy and ????yse define ->.
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:6, TXD:5
please return 'set define' page,press 'set define' button.


NOR flash model :[SAMSUNG] K5L2731CAM
NOR flash size:01000000 (16.0M)
NOR flash ID code :00EC257E (25082501) [119]
Int.RAM size:0000C000 (0.48M)
Ext.RAM size:00400000 (4.0M)
Bootloader in [NOR] flash

naimjapan
11-29-2008, 09:59
sigmatel s 92 flash file tested by meeee 1000% okkkkkl


http://www.4shared.com/file/73639046...MATEL_S92.html

naimjapan
11-29-2008, 10:31
s3 touchscreen calibration not working even after changing touchscreen and also byepass calibration failed in infinity. any hardware solution pls.

tks


bro flash by this file n dont ffs formatte any other opration
just start phone n rply must

naimjapan
11-29-2008, 10:34
sigmatel S1 flash file

http://www.4shared.com/file/73640995/e777a065/sigmatel_s1.html

cell123
12-01-2008, 09:18
need sigmatel v88 tested pinout

naimjapan
12-01-2008, 09:58
need sigmatel v88 tested pinout

sigmatel v88 pinout


GND:6
VCC:11
spy and ????yse define ->.............._............._.....
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:5, TXD:8

akshay1076
12-01-2008, 10:19
S2 S3 hedsset solution 100% ok by mee..................

http://www.4shared.com/file/71429225/20c99c47/s3_headset_full_solution.html
please send me java & pc suite links

naimjapan
12-01-2008, 13:01
china phone suite

http://www.4shared.com/file/71446804/bf4cae73/China_PhoneSuite.html

punithan
12-02-2008, 07:35
sir
sigmatel s4 pinout please
thanks

naimjapan
12-02-2008, 10:21
some china phone games

http://www.imghype.com/data/08c0185d72downlo15.gif (http://www.4shared.com/file/72022246/92e2b5f1/china_gamesgame_files_nes.html)

naimjapan
12-02-2008, 11:10
http://www.imghype.com/data/307a3e590es2+s3+network.JPG

naimjapan
12-06-2008, 15:25
sir
sigmatel s4 pinout please
thanks

GND:8
VCC:1
MTK pins status Read success!
spy and analyse define ->.
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:7, TXD:6


12 pin connector


CPU model :6225 ( HW_VER: 8A03 )
download Boot ...
boot File Ver.:04.02
NOR flash model :[TOSHIBA] TV00578002DABD
NOR flash size:01000000 (16.0M)
NOR flash ID code :00980049 (00000000) [92]
Int.RAM size:0000C000 (0.48M)
Ext.RAM size:00400000 (4.0M)

sarasa
12-06-2008, 15:40
I HAV A S3 WHEN I PUT SIM IN SET THAN SET GOES TO SWICTH OFF.I formattad by infinity ,hke box flashed from new file but same result:o

naimjapan
12-07-2008, 10:49
I HAV A S3 WHEN I PUT SIM IN SET THAN SET GOES TO SWICTH OFF.I formattad by infinity ,hke box flashed from new file but same result:o


ri hot cpu n power ic n chek network pf

JOCKER102
12-07-2008, 11:21
this is only 4 sigmatel phone section s1 s2 s3 etc....
brother i have a strange problem with sigmatel s9..mic ok but getting a hard unbeliveable slow voice from this hand set..have any idea ..thanks in advance

naimjapan
12-12-2008, 13:04
s4 flash file tested by meeeeeeeeeeee

http://www.4shared.com/file/75615480/1a30bc80/SIGMATEL_S4.html

punithan
12-12-2008, 14:29
GND:8
VCC:1
MTK pins status Read success!
spy and analyse define ->.
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:7, TXD:6


12 pin connector


CPU model :6225 ( HW_VER: 8A03 )
download Boot ...
boot File Ver.:04.02
NOR flash model :[TOSHIBA] TV00578002DABD
NOR flash size:01000000 (16.0M)
NOR flash ID code :00980049 (00000000) [92]
Int.RAM size:0000C000 (0.48M)
Ext.RAM size:00400000 (4.0M)

Sir
the s4 was come for flight mode
i put code the set was dead
then i put somany flash files
the set was on but white screen
please give the flash file
my read file is
v04BOWAY25_GEMINI_PCB01_GPRS_MT6225_S00.S4_TOSHIBA _ETFIHAP_V030.BIN
plsssssssssssssssssss
helppppppppppppppppp
meeeeeeeeeeeeeeeeee
sirrrrrrrrrrrrrrrrrrrrrrrrrrrr
Regards
punithan

punithan
12-13-2008, 08:51
s4 flash file tested by meeeeeeeeeeee

http://www.4shared.com/file/75615480/1a30bc80/SIGMATEL_S4.html


Sir this flash is ok for v.25
but
my set is v.30
please send s4=v.30 flash file
Thanks
Regards
Punithan

I want this file very very very urgent pls help me sirrrrrrrr:mad:

akshay1076
12-13-2008, 08:52
my sigmatel s4 screen is not touch screen & not formating by holding power for 1 min 10 sec

naimjapan
12-24-2008, 08:33
my sigmatel s4 screen is not touch screen & not formating by holding power for 1 min 10 sec

your phone is not sigmatel it is the copy of same

vinay_ab123456
01-03-2009, 18:56
sigmatel s3 screen goes like mirror after flashing...plz give me proper spiderman read flash......

naimjapan
01-05-2009, 08:55
screen like mirror after flashing

it's not flash file fault it formatting problem bro try 2 same time 5 or 6 time continue format n on time start the phone

n in starting cond. Remove batt n write flash n formatt now your phone is complete ..... tested by meeee 1000%

vinay_ab123456
01-06-2009, 12:26
thanx it is working..............

xpsunny
01-06-2009, 12:50
Hi,

i am using Sigmatel S4 model, does anyone has got any tweak codes? for examplle *#900# is used to turn on the BT power.

xpsunny
01-06-2009, 12:59
Hi,

i am using Sigmatel S4 model, does anyone has got any tweak codes? for examplle *#900# is used to turn on the BT power.

naimjapan
01-06-2009, 13:12
Hi,

i am using Sigmatel S4 model, does anyone has got any tweak codes? for examplle *#900# is used to turn on the BT power.

dial *#3646633# in the home screen, u will see engineer mode

n follow the menu what u want.......... all in one code

xpsunny
01-06-2009, 13:28
dial *#3646633# in the home screen, u will see engineer mode

n follow the menu what u want.......... all in one code

Thank you. thank you. thank you sooooo much.

And please tell me the Phone code also. the password that is asked when i transfer the phonebook from sim card to the phone memory.

naimjapan
01-06-2009, 14:47
default user code: 1122, 3344, 1234, 5678

naimjapan
01-06-2009, 15:58
this is the soft 2 check your file ok or not ok this helpfull 4 all china softwer programmer

http://www.4shared.com/file/79250691/e9c717a9/chain_flash_hex-editor.html

xpsunny
01-07-2009, 07:54
How to download and update the flash file?

robean
01-08-2009, 10:39
screen like mirror after flashing

it's not flash file fault it formatting problem bro try 2 same time 5 or 6 time continue format n on time start the phone

n in starting cond. Remove batt n write flash n formatt now your phone is complete ..... tested by meeee 1000%

any other idea i have tried but not solved bro
help me

rahman2040
01-08-2009, 14:18
hi in my sigmatel s92 am not getting displayed names in incoming calls. please help my id rahman2040

naimjapan
01-09-2009, 08:01
hi in my sigmatel s92 am not getting displayed names in incoming calls. please help my id rahman2040

bro manually store your caller name n number in phone book

vinay_ab123456
01-13-2009, 07:51
sigmatel t33 formatting ok but when flashing ,spiderman box shows change lower baudrate at any baudrate.it shows flashing failed.......set is in dead condition.........help...

vickymatu
01-13-2009, 14:42
Hi Naimjapan,

First of all thanks for the very useful thread and quick solutions :).

I am an end user (means I donno repairs n donno what is flash). I bought Sigmatel S4. it works fine.

I want few tricks / tweaks for the phone along with a doubt.

My mobile bluetooth is working fine ordinary use like phone calls/file transfer. But audio player songs are not getting transfered to bluetooth :(.
In Bluetooth,when I select about , I found there are lot of profiles like A2DP,AVRCP .......
But in audio player, when I try to search for bluetooth headset , my set is not fininding the headset. The same set is easily recoginzed in regular bluetooth search.
Can you guide me what is the problem and how can hear MP3 songs on my bluetooth head set.

Also my mobile doesnot show when battery fully charged :(. and battery charge is getting down very fastly. Is there any way to resolve it.

Finally ,I tried the PC-SUIT software provided here in other threads, which are not working with my phone :(.
How to copy phones conatcs to my system ?
also how change/add new tones to my messages.

sorry for troubling you with so many questions. Waiting for your answer :).

/Vicky

naimjapan
01-15-2009, 08:16
sigmatel t33 formatting ok but when flashing ,spiderman box shows change lower baudrate at any baudrate.it shows flashing failed.......set is in dead condition.........help...

bro try to direct connect with on board RX TX n post rply

naimjapan
01-15-2009, 08:20
Hi Naimjapan,

First of all thanks for the very useful thread and quick solutions :).

I am an end user (means I donno repairs n donno what is flash). I bought Sigmatel S4. it works fine.

I want few tricks / tweaks for the phone along with a doubt.

My mobile bluetooth is working fine ordinary use like phone calls/file transfer. But audio player songs are not getting transfered to bluetooth :(.
In Bluetooth,when I select about , I found there are lot of profiles like A2DP,AVRCP .......
But in audio player, when I try to search for bluetooth headset , my set is not fininding the headset. The same set is easily recoginzed in regular bluetooth search.
Can you guide me what is the problem and how can hear MP3 songs on my bluetooth head set.

Also my mobile doesnot show when battery fully charged :(. and battery charge is getting down very fastly. Is there any way to resolve it.

Finally ,I tried the PC-SUIT software provided here in other threads, which are not working with my phone :(.
How to copy phones conatcs to my system ?
also how change/add new tones to my messages.

sorry for troubling you with so many questions. Waiting for your answer :).

/Vicky

bro contact any repairer n try to upgrade ur phone softwer n post result

naimjapan
01-20-2009, 11:26
usefull 4 some china phone come zero

http://www.4shared.com/file/81572121/287f2f7f/commzero-2611.html

naimjapan
01-20-2009, 11:28
usefull 4 some china phone come zero

http://www.4shared.com/file/81572121/287f2f7f/commzero-2611.html

vinay_ab123456
01-22-2009, 19:32
if chinese set will be banned in india with imei problem....will sigmatel be banned or not??????

naimjapan
01-23-2009, 07:32
those set will be banned in india with imei start from ( zero ) n (one ) 0_1 like 012345678912345

it's dame imei ... it create some big problem 4 communication to cellphone network company's

government cant block selling n repairing now happy .............................

vickymatu
01-29-2009, 04:40
bro contact any repairer n try to upgrade ur phone softwer n post result

Hi,
As you advised, I went to repairer in Hyderabad,India. They charged me Rs.150 and took my phone into some where else and they bought it back in 20 minutes saying its formatted and reinsatlled. But after that i came to know they cheated me by resetting the factory defaults :(. Here in my place the china phone market is filled with cheaters :(.

Bro, Can I do reinstall software using my system as I have data cable :)...I dont know what is flashing and etc. But is there any way to format and reinstall software:confused:

/Vicky

dhiraj84
01-31-2009, 13:54
how to sol T33 headphone mode ??
please help...

naimjapan
02-09-2009, 08:08
this fault 20% for battery n bettry connctor cheked by me

50% for soft
50% for display

vinay_ab123456
02-21-2009, 08:36
t99 headset problem..........give us solutions......thnx in advance

naimjapan
02-23-2009, 08:54
t99 headset problem..........give us solutions......thnx in advance

in short time rply u send me photo

naimjapan
04-02-2009, 10:06
hi 4 all member

now i'm back 2 the board exm


all answer is cleared in 24 hr

naimjapan
04-02-2009, 10:09
hi 4 all member

now i'm back 2 the board exm


all answer is cleared in 24 hr

rasik
04-02-2009, 20:25
sigmatel s4 display 37th track cut pls help me urgent

shank2
04-13-2009, 02:45
TRICK FOR SIGMATEL FORMATING WITHOUT PC

hold power key 1 minute 10 sec...
with charge battry ..
ur set will formate & ask touch calibration ..
do that ur set is ok now without pc.
tested on sigmtel s3 s2 s4 s8 s9 just try
well i tried but nothung happened...can someone plz help me??

dheeraj arora
05-02-2009, 23:29
ha i have one sigmatel s3 i have rehot cpu n power ic n i try to connect it connected but no any flashing is done or not even formetting wht to do plz reply my id is arora20d_dheeraj@yahoo.com

jsachaniya
05-04-2009, 13:00
I have Sigmatel HXD 2008i (New Model). Mobile come with Separate charger and USB cable. But when i connect USB cable with PC its only charging, No option such as Mass Storage, Web Cam or COM port. Code *#3646633# is working on this moible. I have set Device > Set UART > PS config > UART 1 > 115200. But still its not showing Mass storage or COM Port.

Its ok it COM port dosent work but atleast i want Mass Storage option for file transfer...

Please help....

Thanks a lot in advance

jsachaniya
05-04-2009, 13:09
I have Sigmatel HXD 2008i (New Model). Mobile come with Separate charger and USB cable. But when i connect USB cable with PC its only charging, No option such as Mass Storage, Web Cam or COM port. Code *#3646633# is working on this moible. I have set Device > Set UART > PS config > UART 1 > 115200. But still its not showing Mass storage or COM Port.

Its ok it COM port dosent work but atleast i want Mass Storage option for file transfer...

Please help....

Thanks a lot in advance

aasass
07-06-2009, 11:54
any solution for sigmatel v88 white screen? LCD is ok. . .