s520 still cannot be unlock with new flash files

[ryumahon]

pleasant evening infinty team!

thanks for the new flash files and updates.. however i would like to inform you that all new flash files of s520 with SIM FREE filenames still are not working... after flashing, phone still ask for NETWORK KEY....


hope to hear from you guys!!!



br



here is one of the logs that i made after flashing with the new sim free files..


Device: Alcatel-OT-S520
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
enhanced security fix enabled
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:FC03:A002
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.17313 2ED.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: 173132ED
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902026487
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081015-200700.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#3 calculation...
customization: CD44BN00
customization area adjusted: CD44BN00
done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area#3
security area#3 calculation done
security area#2 calculation...
..................counter: 01
done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area#2
security area#2 calculation done
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081015-201105.B0X.bin
Finished, time used: 280 sec
Remove/Install battery now !


phone still remains locked!



br

[InfinitySupport]

Hello,

Did you tried to make \"Format ffs\" after flash ?

[.::LUQMAN::.]

i unlock 1 phone s520 this file work fine

S520X-2AVGGB1_XD44BN00_JRD25_06B_PCB01_GPRS_MT6225_S00.M AUI_06B_W07_28_SP1_V34_2008-05-20_En_De_Ru_Bg_Ua_simfree

thx nfinity team...........

[napz]

Alcatel ot S520 unlocked with new flash files :O greaat work infinity team ur the best (K)

[ryumahon]

so strange... why is it that my s520 is still locked after flashing with the new flash files... i tried to format fs complete but still the same.. still asking for a network key...

[InfinitySupport]

Hello,

go to software "Settings" page and make "enhanced security fix" option DISABLED.
Flash phone again with simfree file.

[ryumahon]

ill try your advice sir and will post the result later.... thanks for your support!!!



br

[ryumahon]

too bad... phone is still locked.... i disabled enhanced security check but still no luck! any more advices sir????



br

[Potvora]

I have this phone for repair and unlock. Phone ask network key for all SIM cards. Flashing with simfree firmware not help. Try flash firmware with UMC in end of name, phone accept UMC SIM, but after flash SIMfree again Ask for Key for all cards again... :confused:

[InfinitySupport]

@ryumahon
@Potvora

Be sure that you have used simfree file.
make format ffs after unlock (if phone is still locked).

[luckycool]

yes sim free file definitely work ,, i have done one myself

[ryumahon]

@infinity support


i am 100% sure that i tried all 3 simfree flash files from support site... and tired with format ffs after flashing but still no luck sir...


phone still asks for network key.... maybe this phone has a new protection or whatever.. i hope you can help me with my problem sir.



br

[InfinitySupport]

Hello,

To be honest I don;t think that any new type of S520 is exist.
I respect your time and your tries, but please, try to flash phone again with simfree file (do not change any options, use options that was sent in software by default). After flashing make \"format ffs\" in \"complete\" mode.
Let;s see results.
In case of any problems pls post here log text so we can check it.

[sikandarkaaal]

unlock 100% ok but after unlock no service any idea

[InfinitySupport]

Hello,

Did you tried to make 112/emergency call without sim card ?

Check back phone label, post here exact phone model name.

[Potvora]

@ryumahon
@Potvora

Be sure that you have used simfree file.
make format ffs after unlock (if phone is still locked).

Yes, i'm sure. I have two files downloaded fir S520, UMC and simfree. When i flash UMC file, phone accept UMC card and ask code for others (phone locked), and when flash you simfree file, phone stop accept UMC card, ask for netcode for all cards :confused:

[ryumahon]

after flashing with simfree file here is the log of formatffs complete..

COM3 [VCP4] selected
Device: Alcatel-OT-S520
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:FC03:A002
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.17313 2ED.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: 173132ED
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902026487
flash: 01227E22442200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22442200:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081020-152656.B0X.bin
Finished, time used: 70 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !




result still ask for network key... i will flash again with another simfree files and post result here...



br

[ryumahon]

this time.. with different flash file..

S520X-2AVGGB1_XD44BN00_JRD25_06B_PCB01_GPRS_MT6225_S00.M AUI_06B_W07_28_SP1_V34_2008-05-20_En_De_Ru_Bg_Ua_simfree.B0M.bin loaded
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
Loaded file w/protection: security area (code #1)
detecting languages...
Languages: En Ru De Farsi Bg Ua



COM3 [VCP4] selected
Device: Alcatel-OT-S520
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:FC03:A002
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.17313 2ED.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: 173132ED
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902026487
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081020-153656.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#3 calculation...
customization: CD44BN00
customization area adjusted: CD44BN00
done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area#3
security area#3 calculation done
security area#2 calculation...
..................done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area#2
security area#2 calculation done
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081020-154122.B0X.bin
Finished, time used: 311 sec
Remove/Install battery now !

then i try to format ffs complete

COM3 [VCP4] selected
Device: Alcatel-OT-S520
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:FC03:A002
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.17313 2ED.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: 173132ED
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902026487
flash: 01227E22442200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22442200:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_173132ED_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081020-154300.B0X.bin
Finished, time used: 55 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !




and the result is.......



STILL..... asking for network key....


maybe some more tips.....


thanks and

br

[InfinitySupport]

Hello,

Please, download from support area and use MModule v2.36, try to frite again one simfree file.

[ryumahon]

thanks!! i will try it now....


br

[sikandarkaaal]

i cant understands your ans modal s520x

[ryumahon]

waaaaaaaaaaaaaaaaaaaaaaaa!!!!! after first try with 2.36... the phone went OK!!!



thank so much for the non-stop support!! truly the best team when it comes to support!!!




br

[sikandarkaaal]

and solve my problam InfinitySupport

[InfinitySupport]

and solve my problam InfinitySupport

Hello,

Please, explain your problem more detailed so we will be able to understand the problem well.

[Potvora]

Hello,

Please, download from support area and use MModule v2.36, try to frite again one simfree file.
Thanks, my phone is really unlocked :)

[sikandarkaaal]

COM7 [VCP0] selected
module v2.36
Device: Alcatel-OT-S520X, S520A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:A303:A006
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.CF0A8 3FA.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: CF0A83FA
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902012383
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_CF0A83FA_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081019-095604.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CD44GD00
done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
..................done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_CF0A83FA_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081019-101859.B0X.bin
Finished, time used: 1415 sec
Remove/Install battery now !




now say no service
unlock ok

[InfinitySupport]

You must use S520X file instead of S520A !

S520A is for America !

[sikandarkaaal]

it is not American it come from spain

[InfinitySupport]

So why you have used S520A files ?

You must use S520X file, DO NOT use S520A !

[billyuk009]

COM5 selected
module v2.38
Device: Alcatel-OT-S520X, S520A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:DC03:A00C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.F942E ECA.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_B8A8FFD4].rpl
identification#1 detection finished
device-id: F942EECA
identification#1 protocol ver: 05
ver. sw1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw2: MAUI.06B.W07.28.SP1.V34, 2B005747
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35198902007116
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_F942EECA_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081022-194435.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CD44BN00
done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
..................done
flash: 01227E22442200:18E59F00000000
flash: 01227E22442200:18E59F00000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_F942EECA_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_B8A8FFD4_20081022-195357.B0X.bin
Finished, time used: 603 sec
Remove/Install battery now !
thanks infinity;);)

[akkay]

which cable please? rj45 or usb?
any driver?

[InfinitySupport]

Hello,

As I can see you did not checked documentation before.
What usb cable you talk bout ? What drivers ?
You must use RX/TX cable.

Here is an instruction how to get cable/pinout information:

1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout

http://www.infinity-box.biz/download/public/Infinity-Box_shell_v112.jpg

Here is information how to build your own cable: http://www.gsmhosting.com/vbb/showthread.php?t=342807