imran_qasim
10-15-2008, 14:45
@infinity-Team
Thanks for the nice software which i didn't noticed before that Infinity Support Siemen ST60 for direct Unlock and flash.
here is the story.
yesterday i recieved one phone from customer which was saying "Sim MEP Failed" i read codes with JAF LOGER and i try all codes but no sucess phone still stays on the same error message then i try DreamBox and it reads 2 codes but problem still same error still same, then i downloaded one flasher and flash file posted by BB-gsm on this forum fones flash successfully but still the problem was same and error message was same so i was thinking to return this phone to customer but at the last try i checked in Infinity shell i thought may be it also have Calculator to calculate codes but i was surprised to see the options available in QMODULE , i unlock the phone with direct unlock and voila phone is working fine and no more error message, thank you infinity team for the nice software.
here is the log.
Application: C:\Program Files\InfinityBox\QModule\QModule.exe
Loading data, wait...
[Infinity Box] v2.21
S/N: xxxxxxxxxxxx
Wait...
Current device: Siemens-ST55,ST60
Done
COM1 ready
COM1 [VCP0] selected
Device: Siemens-ST55,ST60
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 04227E22212200:00E3A000000000
flash: Fujitsu MB84VP24491HK T 8Mb
id: 00005250
Boot Done
Set baud...
460800
Set baud Done
Check Flash...
Check Flash Done
Check space...
file saved: C:\Program Files\InfinityBox\QModule\backup_eeprom_unlock-1_20081015-122053.05E.bin
Check space Done
Check parameters...
Check parameters Done
Format file system...
Format file system Done
Write...
Preparing...
area requested/selected: 02/02
Write Done
Finished
Remove/Install battery now !
Time used: 37 sec
Take Care
ENJOY
Thanks for the nice software which i didn't noticed before that Infinity Support Siemen ST60 for direct Unlock and flash.
here is the story.
yesterday i recieved one phone from customer which was saying "Sim MEP Failed" i read codes with JAF LOGER and i try all codes but no sucess phone still stays on the same error message then i try DreamBox and it reads 2 codes but problem still same error still same, then i downloaded one flasher and flash file posted by BB-gsm on this forum fones flash successfully but still the problem was same and error message was same so i was thinking to return this phone to customer but at the last try i checked in Infinity shell i thought may be it also have Calculator to calculate codes but i was surprised to see the options available in QMODULE , i unlock the phone with direct unlock and voila phone is working fine and no more error message, thank you infinity team for the nice software.
here is the log.
Application: C:\Program Files\InfinityBox\QModule\QModule.exe
Loading data, wait...
[Infinity Box] v2.21
S/N: xxxxxxxxxxxx
Wait...
Current device: Siemens-ST55,ST60
Done
COM1 ready
COM1 [VCP0] selected
Device: Siemens-ST55,ST60
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 04227E22212200:00E3A000000000
flash: Fujitsu MB84VP24491HK T 8Mb
id: 00005250
Boot Done
Set baud...
460800
Set baud Done
Check Flash...
Check Flash Done
Check space...
file saved: C:\Program Files\InfinityBox\QModule\backup_eeprom_unlock-1_20081015-122053.05E.bin
Check space Done
Check parameters...
Check parameters Done
Format file system...
Format file system Done
Write...
Preparing...
area requested/selected: 02/02
Write Done
Finished
Remove/Install battery now !
Time used: 37 sec
Take Care
ENJOY