PDA

View Full Version : Big problem.lg kg200


LOLLA
10-26-2008, 11:54
Friends i have a lg kg200 .it have problem of software means..when i format the mobile.it just power on once..but only white screen blink and turns off...after that it could not power on...so i need a perfect solution for it..thanks

InfinitySupport
10-26-2008, 14:21
Hello,

What was with phone before format ?
Did you tried to flash phone ?

LOLLA
10-26-2008, 16:07
sir i have flashed the phone but nothing done..:(:(:(:(

Shakeel_pattoki
10-26-2008, 16:28
which kind of software problem.
means what was showing phone problem before flashing?

LOLLA
10-27-2008, 20:32
it was totally dead . i formatted the mobile.and for once it blinks with white screen and turns off again,

InfinitySupport
10-27-2008, 21:18
Hello,

If phone can not power-on after flash + format there is a very big reason to check phone hardware.

Also check battery voltage and press and hold phone Power button for a long time after format operation.

LOLLA
10-29-2008, 21:06
Not done ...i think it is eeprom problem. So please moderator give us good eeproms.

InfinitySupport
10-29-2008, 21:18
You are wrong.

If phone can not power-on after flash + format there is a very big reason to check phone hardware.

Also check battery voltage and press and hold phone Power button for a long time after format operation.

Mayapk
10-30-2008, 13:53
LG KG 200 not charging and ear problem

LOLLA
10-30-2008, 14:10
not done sir ....you can check a model ....please

InfinitySupport
10-30-2008, 23:18
LG KG 200 not charging and ear problem

Hello,

You must check phone hardware.

InfinitySupport
10-30-2008, 23:23
@LOLLA

If phone can not power-on after flash + format there is a very big reason to check phone hardware.
You can try to use different firmware files.

Also check battery voltage and press and hold phone Power button for a long time after format operation.

kash786
11-09-2008, 18:07
so no other option infact all the fone kg200 with white screen problem or displays only lg and turn off problem i could not be able to fix them by infinity i tried all the ways to format to flash to uncheck advance chip detection and smart write but never been lucky..please infinity team try to fix this bug in next update so we can do it with out chiness infinity pin finder.

regards
malik

LOLLA
11-09-2008, 19:31
yes i checked with several firmwares but not done ,,,,help!!!!!!!

InfinitySupport
11-09-2008, 23:42
so no other option infact all the fone kg200 with white screen problem or displays only lg and turn off problem i could not be able to fix them by infinity i tried all the ways to format to flash to uncheck advance chip detection and smart write but never been lucky..please infinity team try to fix this bug in next update so we can do it with out chiness infinity pin finder.

regards
malik

Hello,

Do you understand what "bug" you talk about ?
My friendly advice: always make backup before flashing, always check hardware if phone comes to you in dead condition and you will have no any "bugs".

kash786
11-11-2008, 04:15
@INFINITY..

YES,i highly regard your advice dear.but unfortunatlly i tried many 195 and 200 for some reasons i cant get any good response .and according to my knowledge if there is white screen or display only lg and shut down it is some how software problem .i checked all the hardwares of these fones from lcd to pa and light ics sim reading ics by changing them but never got any luck .
i will really appriciate if you please guide us in proper way that how to format or how to flash so we can get best out of it.

my best regards

malik

InfinitySupport
11-11-2008, 11:01
Hello,

You can try to use another firmware version for flashing to get better results.

kash786
11-11-2008, 14:39
dear here is a log check it and advise

COM7 [VCP0] selected
Device: LG KG200
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B02:8B01]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:2C18:657B
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000001:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: ARIMA26_05C_PCB01_GPRS_MT6226M_S01.7S7330TH-001-R1D.BIN
ver. sw2: 7S7330TH-001-R1D, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[ARIMA26_05C_PCB01_GPRS_MT6226M_S01.7S7330TH-001-R1D.BIN]]...
file saved: C:\Program Files\InfinityBox\MModule\backup_eeprom[ARIMA26_05C_PCB01_GPRS_MT6226M_S01.7S7330TH-001-R1D.BIN]_20081111-181206.A3E.bin
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Area: Firmware
flash: 98004900000001:29EA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 1279 sec
Remove/Install battery now !

kash786
11-11-2008, 14:45
it is a white screen blinking fone i also tried with eeprom but no use ....help us please..

br
malik

InfinitySupport
11-11-2008, 15:03
Hello,

Try to flash phone with different firmware versions.

kash786
11-11-2008, 17:47
i tried it dear flashed it more then 4 diffrent versions...but even then i have to ask help..

lix_DAVAO
11-11-2008, 17:54
we can't yet conclude it's bug or what not unless done with other tool. so far it could be hardware related problem also. or wrong firmware flashed.

InfinitySupport
11-11-2008, 19:24
@kash786
You can see 6 flash files in support area, try it all one by one.

FARHAD 007
11-21-2008, 17:57
Hello,

Do you understand what "bug" you talk about ?
My friendly advice: always make backup before flashing, always check hardware if phone comes to you in dead condition and you will have no any "bugs".
plzzzzzzzzzzzzzzzzzzzzzzzzz give somo digrames 4 kg200 ;)

srkhan
11-21-2008, 18:05
Write the Back up eeprom from Backup then see...

InfinitySupport
11-21-2008, 18:18
plzzzzzzzzzzzzzzzzzzzzzzzzz give somo digrames 4 kg200 ;)

Hello,

Please, explain your problem more detailed so we will be able to understand how to help you.

FARHAD 007
11-21-2008, 18:28
Hello,

Please, explain your problem more detailed so we will be able to understand how to help you.
sir when rehote pf for signal when i try to on it is dead not on yyyyyyyyyyy :rolleyes:

FARHAD 007
11-21-2008, 18:31
plz hurry sir custmer ask me give my set b/c it is dead how can i give dead set

InfinitySupport
11-21-2008, 19:06
Hello,

Please, send your Infinity-Box S/N to support@infinity-box.biz now so we will be able to continue this discussion here.

kabul
11-21-2008, 23:09
Saam problam plz help

InfinitySupport
11-21-2008, 23:11
Saam problam plz help

Hello,

Please, explain what is the problem exactly.

FARHAD 007
11-22-2008, 09:10
Hello,

Please, send your Infinity-Box S/N to support@infinity-box.biz now so we will be able to continue this discussion here.
sir not dead with flashing dead by rehoting pf i want to hardware saloution whit digram plzzzzzzzzzzzzzzzzzzzz
:(

FARHAD 007
11-22-2008, 09:14
sir not dead with flashing dead by rehoting pf i want to hardware saloution whit digram plzzzzzzzzzzzzzzzzzzzz
:(
i think u have not any digrame lg kg200 kg300 kg195 etc 4 any problem :mad:

Umair Rashid
11-22-2008, 09:51
i think u have not any digrame lg kg200 kg300 kg195 etc 4 any problem :mad:
move in lg hardware section.hope u get any help.:)

ayyazanjum
07-03-2009, 07:54
sir plzzzzzzzzzzzzz help me urgent i have kg2300 it has no lcd lights i change led and quail but not problem is same plzzzzzzzzzzzzzzzzz hel

ayyazanjum
07-03-2009, 07:55
sir plzzzzzzzzzzzzz help me urgent i have kg200 it has no lcd lights i change led and quail but not problem is same plzzzzzzzzzzzzzzzzz hel