Infinity box failed.

[Shakeel_pattoki]

Infinity box failed to format a china mobile model and photo here.
Cpu type.6228.
Model no.A808 only.
connector type trend t100.
1........8
4=GND
5=TXD
8=RXD

==== log: [10/28/2008 2:04:05 PM] ====
COM20 [Serial2] selected
Device: Autodetect 6228, 6229, 6230 NAND
Checking data, wait...
Action: NAND reset
read mode: 01
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
high speed boot disabled
chip: 0031:0000:0101
high speed disabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND id: ADF1801D
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
NOR: 0000:000000000000 [00000000]
NAND: 00AD:00F10080001D [08400000]
NOR chip is not installed
Initialize Done
Set baud...
115200
error: unexpected answer:
error: can't work at this speed, use lower speed
Set baud Fail
Finished, time used: 74 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== log: [10/28/2008 2:05:30 PM] ====
COM20 [Serial2] selected
Device: Autodetect 6228, 6229, 6230 NAND
Checking data, wait...
Action: NAND reset
read mode: 01
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
Boot Fail
Finished, time used: 5 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== log: [10/28/2008 2:06:16 PM] ====
COM20 [Serial2] selected
Device: Autodetect 6228, 6229, 6230 NAND
Checking data, wait...
Action: NAND reset
read mode: 01
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
high speed boot disabled
chip: 0031:0000:0101
high speed disabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND id: ADF1801D
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
NOR: 0000:000000000000 [00000000]
NAND: 00AD:00F10080001D [08400000]
NOR chip is not installed
Initialize Done
Set baud...
115200
error: unexpected answer:
error: can't work at this speed, use lower speed
Set baud Fail
Finished, time used: 104 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== log: [10/28/2008 2:08:14 PM] ====
COM20 [Serial2] selected
Action: reset settings
Model: Autodetect 6228, 6229, 6230 NAND
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6228:8A02:8A02]...
CPU: MT6228
high speed boot disabled
chip: 0031:0000:0101
Connecting, wait...
warning: wrong packet cs
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 93 sec
Remove/Install battery now !
http://img252.imageshack.us/img252/416/image064vc9.jpg (http://www.imagehosting.com/)
http://img370.imageshack.us/img370/9622/image081rp7.jpg (http://www.imagehosting.com/)

[Shakeel_pattoki]

PL2303 USB To COM20
Connecting VE-Dongles.
VE-Dongles SN:**********
VE-Dongles Version:V2.3 Datetime:2008-01
VE-Dongles data verify successed.
register file is activate.
file info.:GuangZhou VicEasy Company MTK6226
----------------
open comport:COM20
please turnon your phone ,until connect success(press F4 Abort).
connecting mobile phone.
CPU Model:6228
downloading bootloader files ...
bootloader files version:03.01
booloader operation in NAND Flash.
Flash type:[HYNIX] HY27UF081G2M
flash ID:00AD00F1 (0080001D) [56]
flash size:08000000 (128.0M)
Ext RAM size:00000000 Int RAM Size:00020000
Read flash information done.
----------------
open comport:COM20
please turnon your phone ,until connect success(press F4 Abort).
connecting mobile phone.
CPU Model:6228
downloading bootloader files ...
bootloader files version:03.01
booloader operation in NAND Flash.
Flash type:[HYNIX] HY27UF081G2M
flash ID:00AD00F1 (0080001D) [56]
flash size:08000000 (128.0M)
Ext RAM size:00000000 Int RAM Size:00020000
format flash...
>>operation done.

[InfinitySupport]

Hello,

I strongly suggest you to use good quality cables instead of buggy Prolific based cables, or at least search this forum and install good drivers for Prolific (link was posted here by support persons several times).

[kachman]

PL2303 USB To COM20
Connecting VE-Dongles.
VE-Dongles SN:**********
VE-Dongles Version:V2.3 Datetime:2008-01
VE-Dongles data verify successed.
register file is activate.
file info.:GuangZhou VicEasy Company MTK6226
----------------
open comport:COM20
please turnon your phone ,until connect success(press F4 Abort).
connecting mobile phone.
CPU Model:6228
downloading bootloader files ...
bootloader files version:03.01
booloader operation in NAND Flash.
Flash type:[HYNIX] HY27UF081G2M
flash ID:00AD00F1 (0080001D) [56]
flash size:08000000 (128.0M)
Ext RAM size:00000000 Int RAM Size:00020000
Read flash information done.
----------------
open comport:COM20
please turnon your phone ,until connect success(press F4 Abort).
connecting mobile phone.
CPU Model:6228
downloading bootloader files ...
bootloader files version:03.01
booloader operation in NAND Flash.
Flash type:[HYNIX] HY27UF081G2M
flash ID:00AD00F1 (0080001D) [56]
flash size:08000000 (128.0M)
Ext RAM size:00000000 Int RAM Size:00020000
format flash...
>>operation done.

hI DO U have the flash file for this model which i can use on infinitybox or Spiderman box???

[himanshu taldar]

hI DO U have the flash file for this model which i can use on infinitybox or Spiderman box???


this model flash file already in infinity support area .try to download from there

[kachman]

M320_PCB04_GPRS_MT6228_S02.M3206V10_07_12_V1_3T06D 071217.BIN

i need this file

[pankaj_gsm]

i format this set many times -----always suceesful