6300 on off format by wrong procedure

[FullFLASHgSMPH]

COM13 [VCP2] selected
module v2.64
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2F75:8D9F
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_security\i d.5CBB2899.[MTK25_06B_PCB01_GPRS_MT6225_S

00.MAUI_06B_W07_12_10.BIN_7DA61A66].rpl
identification#1 detection finished
device-id: 5CBB2899
identification#1 protocol ver: 04
ver. sw1: MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_10 .BIN
ver. sw2: MAUI.06B.W07.12.10, 99E55982
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: 01227E22202200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:18E59F00000000
Finalization Done
file saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_5CBB2899_MTK25_06B_PCB01_GPRS_M

T6225_S00.MAUI_06B_W07_12_10.BIN_7DA61A66_20081029-120213.B0X.bin
Finished, time used: 164 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !



Search results :
for /flashfiles/ and its subdirectories

[bin]

flashfiles/ChineseMiracle/_MT6225/repair_eeprom/MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W0

7_12_10_ffs_01.B0E.bin
[bin]

flashfiles/ChineseMiracle/_MT6225/MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_10 _Nokia-

6300_16m_En_Ru_Fr_Es_De_Th_Tr_Pt_Ar.B0M.bin
[bin]

flashfiles/ChineseMiracle/_MT6225/MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_10 __NOKIA

_6300_16m_En_Ru_Fr_Es_De_Th_Tr_Pt_Ar.B0M.bin

End of search (3 found)

already flash but phone dead

what problem....................

[InfinitySupport]

Hello,

If you have got phone in dead condition it may be software or hardware problem, nobody can be sure.
If you have tried to flash phone with several flash files and phone can not power-on at all you have a reason to check phone hardware.

[shuaib_kashish]

COM13 [VCP2] selected
module v2.64
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2F75:8D9F
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_security\i d.5CBB2899.[MTK25_06B_PCB01_GPRS_MT6225_S

00.MAUI_06B_W07_12_10.BIN_7DA61A66].rpl
identification#1 detection finished
device-id: 5CBB2899
identification#1 protocol ver: 04
ver. sw1: MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_10 .BIN
ver. sw2: MAUI.06B.W07.12.10, 99E55982
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: 01227E22202200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:18E59F00000000
Finalization Done
file saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_5CBB2899_MTK25_06B_PCB01_GPRS_M

T6225_S00.MAUI_06B_W07_12_10.BIN_7DA61A66_20081029-120213.B0X.bin
Finished, time used: 164 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !





already flash but phone dead

what problem....................
hi bro,
if you had tried with software now you should repair by hardware procedure
1-change rtc 32.678 khz.crystal.
2-resold/reball cpu and flash.
3-resold rf section then reflash it
check and post reply
good luck.....