ZTC Q2280 Flash file needed urgent

[ericnite101]

The phone was perfectly working. I wanted to write Chinese firmware which i got from support area. Then after flash the phone powers on but no display. It only gives white screen.
Here is the original flash file :- flash[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_11.BIN]_20081029-010901.B0M

Please help me its urgent. Thanks in advance.

[ericnite101]

Here is operation log:-

COM2 [Serial1] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:8003:0007
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: MT6225_GEMINI_PCB01_GPRS_MT6225_S00.M6225_00J6_HTC 1_00_V04.BIN
ver. sw2: M6225_00J6_HTC1_00_v04, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[MT6225_GEMINI_PCB01_GPRS_MT6225_S00.M6225_00J6_HTC 1_00_V04.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[MT6225_GEMINI_PCB01_GPRS_MT6225_S00.M6225_00J6_HTC 1_00_V04.BIN]_20081029-033256.B0E.bin
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: 98004900000002:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 1930 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

What was the reason to flash phone that was not damaged ?
Do you have original flash backup ?

[ericnite101]

Hello,

What was the reason to flash phone that was not damaged ?
Do you have original flash backup ?


The reason of flashing the phone was to get Chinese language course original firmware had no Chinese language. But the phone was working fine. I don't have original flash backup. Please if you can upload this file in support area :-
flash[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_11.BIN]_20081029-010901.B0M

[ericnite101]

Anybody can upload this file please?

[ericnite101]

Hello,

What was the reason to flash phone that was not damaged ?
Do you have original flash backup ?

Please help me out InfinitySupport. The phone is now working but doesn't display.

[InfinityHelp]

Please help me out InfinitySupport. The phone is now working but doesn't display.

hello!

solution is simple, but we dont have this flash file.
you must find good working phone with firmware:
HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_11
read it out and use it for restoring your phone

[ericnite101]

hello!

solution is simple, but we dont have this flash file.
you must find good working phone with firmware:
HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_11
read it out and use it for restoring your phone


I tried my best looking for same kinda a phone so I can read flash file, I couldn't get one. Am waiting for Infinity to upload it in support area. Thanks in advance.

[InfinitySupport]

Hello,

It will be good if somebody can read full flash from the same good working phone and send
full flash backup to mt62xx@gmail.com so we will be able to prepare and upload
good working files in support area for all users.