n99i tv probplem

[fessi]

hello
see this error message please help me

COM4 [VCP0] selected
module v2.66
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
error: bootcode load error: C00CE08EE490E59F4018E59DC00EE04CC86CE082E002E02CE0 01E02EE004E08E3003E08EE474E59F4024E59D300EE08334E3 E08CE00CE023E002E02EE004E08E1001E08EE458E59F4030E5 9D100EE0411E61E083E003E021E00CE02EE004E08E2002E08E E43CE59F200EE0822AE2E081E001E022403CE59DE003E02EE0 04E08EC00CE08EE420E59F4008E59DC00EE04CC86CE082E002 E02CE001E02EE004E08E3003E08EE404E59F4000E59D300EE0 8334E3E08CE002E1E0E00EE183E00CE02EE004E08E1001E08E E3E4E59F401CE59D100EE0811D61E083E00CE1E0E00EE181E0 03E02EE004E08E2002E08EE3C4E59F4038E59D200EE0822B62 E081E003E1E0E00EE182E001E02EE004E08EC00CE08EE3A4E5 9F4014E59DC00EE04CC8ECE082E001E1E0E00EE18CE002E02E E004E08E3003E08EE384E59F4030E59D300EE08335E3E08CE0 02E1E0E00EE183E00CE02EE004E08E1001E08EE364E59F400C E59D100EE0811D61E083E00CE1E0E00EE181E003E02EE004E0 8E2002E08EE344E59F4028E59D200EE0822B62E081E003E1E0 E00EE182E001E02EE004E08EC00CE08EE324E59F4004E59DC0 0EE08CC8ECE082E001E1E0E00EE18CE002E02EE004E08E3003 E08EE304E59F4020E59D300EE08335E3E08CE002E1E0E00EE1 83E00CE02EE004E08E1001E08EE2E4E59F403CE59D100EE081 1D61E083E00CE1E0E00EE181E003E02EE004E08E2002E08EE2 C4E59F4018E59D200EE0422B62E081E003E1E0E00EE182E001 E02EE004E08EC00CE08EE2A4E59F4034E59DC00EE08CC8ECE0 82E001E1E0E00EE18CE002E02EE004E08E3003E08EE2
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 19 sec
Remove/Install battery now !


i know this a second cpu
but 1 cpu no network
therre s any relation between them.
what i can do to solve this 2 pb
thanks

[InfinityHelp]

hello!

do you hold power button long enough? even when phone powered ON, you stil must keep it pressed

[fessi]

hello
yes of corse i know that
thanks
but still same

[fessi]

i think that you have a new flash file
is it ready if yes
can this flash solve this pb no network after format
thanks

[BouRRi_GSM]

this happen with some MTK phones when u use wrong pinouts or CPU2 pinout.


br :)

[dompezvicky]

Hello Fess
if your N99i is the L12C cable type or 1x12 connector.
then it has two cpu:
First C.P.U is 6205 with pinout at RX=8, TX=. size is aproximately 1.8mb
Second C.P.U 6226 is with pinout at RX=9, TX=10 size is 16mb.
you must find the second pinout to be able to read the flash as your log shows, you must use the second pinout.
with that you can even format the phone ffs or do what you want and have it working well.
try and post results, i have personally tested this method.

[dompezvicky]

i think that you have a new flash file
is it ready if yes
can this flash solve this pb no network after format
thanks

it will solve the problem of no network after format cos u just lost the calibration settings during FFS format. Flash with proper file will restore it.

[fessi]

hello
phone come no network after flash.
then i don't have good backup to restore it
then have you good flash file .

[fessi]

hello
phone come no network after flash.
then i don't have good backup to restore it
then have you good flash file .

[InfinityHelp]

hello!

what cable do you use as interface? pinfinder?