View Full Version : n73 pin finder problem
BULLBOX5
10-30-2008, 10:48
why all n73 cant fine tx rx
software version: 1.14
cable type: 1x14 DKU-2 (L14F)
platform: MT: MT6205, MT6217-MT6228, MT6230
searching adapter at COM13...
adapter found, version: 2000
pins: 14, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
failed to detect pins
time required: 77 sec
Power Off !
L14F
BULLBOX5
10-30-2008, 11:08
http://i477.photobucket.com/albums/rr139/advance_bucket/untitled-1.jpg
InfinityHelp
10-30-2008, 23:55
hello!
first of all make sure which MCU this phone is based
BULLBOX5
10-31-2008, 03:59
which MCU this phone is based
hi
i think n73 china mcu is only one
3stanGsm
10-31-2008, 06:01
hi
i think n73 china mcu is only one
mate he means what CPU Based.
MTK, Infineon. etc.
BULLBOX5
10-31-2008, 06:35
using rx tx ground
format ok
but pin finder cant detect tx,rx
COM13 [VCP4] selected
module v2.64
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:53E0:4020
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: BASECODE
Version: h526_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35009273399844
connection Ok
building list...
done
items to clear: 189
170 of 189 items cleared
building list...
done
0 items remains
Finished, time used: 231 sec
Remove/Install battery now !
3stanGsm
10-31-2008, 09:50
here's mine with N73...
Power On !
software version: 1.14
cable type: 1x14 DKU-2 (L14F)
platform: MT: MT6205, MT6217-MT6228, MT6230
searching adapter at COM7...
adapter found, version: 2000
pins: 14, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
19200 fixed
error: boot initialization step-2 failed:
error: boot initialization step-2 failed:
error: boot initialization step-2 failed:
error: boot initialization step-2 failed:
19200 fixed
CPU: MT6226
result: Rx:12 Tx:13
time required: 66 sec
topnoyze
10-31-2008, 10:34
i already recieved almost 4 N73 china with L14F dku connector...all of it dont really detetcs on pinfinder.....i just dont know why.....
BULLBOX5
10-31-2008, 12:34
all of it dont really detetcs on pinfinder
same here maybe cable or what please advice
cable type: 1x14 DKU-2 (L14F)
platform: MT: MT6205, MT6217-MT6228, MT6230
searching adapter at COM7...
SAME
InfinityHelp
10-31-2008, 21:55
hello!
if phone is based on MT MCU, but pinout cant be found-
try one more search with Finder activation tries 10
BULLBOX5
11-01-2008, 02:35
Finder activation tries 10explain more clear what is that
3stanGsm
11-01-2008, 05:14
explain more clear what is that
that's the OPTION located at the right side of the GUI.
InfinitySupport
11-02-2008, 00:19
i already recieved almost 4 N73 china with L14F dku connector...all of it dont really detetcs on pinfinder.....i just dont know why.....
Did you tried to set "Finder activation tries" to value 20 and repeat detection process ?
Did you tried to check phone PCB, probably RX and TX points located at PCB.