PDA

View Full Version : s6 can't format


omkarvitekar
10-31-2008, 16:11
COM10 [VCP5] selected
module v2.66
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6B03:0008
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: LT526B_R1.0.39.5
Version: PROWAVE25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
building list...
done
items total: 154
items to clear: 154
warning: wrong packet cs
warning: wrong packet cs
154 of 154 items cleared
building list...
done
items remains: 0
Finished, time used: 60 sec
Remove/Install battery now !


but same problem insert sim mobile restart, w/o sim mobile is ok

InfinityHelp
10-31-2008, 22:08
hello!

this format went OK.
if phone not repaired after safe format- try Complete
make full backup for emergency case before this operation

omkarvitekar
11-01-2008, 10:14
i format complete but same problem
flasing is right way

InfinitySupport
11-02-2008, 00:27
Hello,

Did you tried to make 112/emergency call without sim card ?

omkarvitekar
11-05-2008, 16:19
calling 112 w/o sim mobile dead
calling 112 w/o sim mobile on
what is the both problem solution in 2 type

InfinitySupport
11-05-2008, 20:42
Hello,

"calling 112 w/o sim mobile dead": you must repair phone hardware

omkarvitekar
11-06-2008, 07:27
is this the cpu problem

InfinityHelp
11-07-2008, 23:22
is this the cpu problem

hello!

Power Amplifier (PA) problem