After flash set white light

[mov009]

China bluetooth after flash set white light. When i readed good condition set& flash agan.same result but this file not in support area.

Hexing25_gemini_pcb01_gprs_mt6225_s00.maui_gemini_ w08_12_52.bin

[InfinityHelp]

hello!

many same looking chinese sets are different inside.
same happend to you i guess.
find in operation.log first operation which you did and check for exact original version name

[mov009]

==== log: [10/31/2008 8:38:12 PM] ====
COM5 [VCP0] selected
module v2.66
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7F03:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN
ver. sw2: MAUI.GEMINI.W08.12.52, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN]_20081031-204001.B0E.bin
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 98004900000002:18E59F00000000
Finalization Done
Finished, time used: 128 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[InfinityHelp]

hello!

try FFS complete format when after flashing you get "white light"

[mov009]

Yes pro solv but after format set insert sim. But customar sayes befour set dead set is parfact. What can i do pl. what is the prob? it's HW or SOFTWARE?

[InfinityHelp]

hello!

try different sim cards, but looks like some hardware fault

[godai]

China bluetooth after flash set white light. When i readed good condition set& flash agan.same result but this file not in support area.

Hexing25_gemini_pcb01_gprs_mt6225_s00.maui_gemini_ w08_12_52.bin


Could you upload this flash file? I need it, please


Thanks in advance

[InfinitySupport]

Hello,

We will be glad if somebody can send this kind of full flash from good working phone to InfinityBoxSupport@gmail.com so we will be able to upload good files for all users in support area.

[mov009]

==== log: [10/31/2008 8:38:12 PM] ====
COM5 [VCP0] selected
module v2.66
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7F03:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN
ver. sw2: MAUI.GEMINI.W08.12.52, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_52.BIN]_20081031-204001.B0E.bin
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 98004900000002:18E59F00000000
Finalization Done
Finished, time used: 128 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

CAN I USE SUPPORTSIDE FILE:-
flashfiles/ChineseMiracle/_MT6225/repair_eeprom/HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_05__ffs_01.B0E.bin (http://207.218.205.237/download/index-3.php?dir=flashfiles/ChineseMiracle/_MT6225/repair_eeprom/&file=HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GE MINI_W08_12_05__ffs_01.B0E.bin)
http://207.218.205.237/download/index_icons/winxp/binary.png flashfiles/ChineseMiracle/_MT6225/HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_ W08_12_05__ZTC-S600+_16m_En_Cn.B0M.bin (http://207.218.205.237/download/index-3.php?dir=flashfiles/ChineseMiracle/_MT6225/&file=HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GE MINI_W08_12_05__ZTC-S600%2B_16m_En_Cn.B0M.bin)

[InfinityHelp]

hello!

you can try this flash file after you make full backup of existing version (read full flash operation)

[mov009]

NO RESULT SIR, THIS FILE, WHY http://forum.gsmhosting.com/vbb/showthread.php?t=621014 THIS FILE CAN'T UPLOAD IN SUPPORT AREA?
PL UPLOAD THIS FILE IN SUPPORT AREA. BECAUSE THIS FILE I READ FULLY GOOD CONDITION SET.

[mov009]

this file (HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI _W08_12_52.BIN)
and this file(HEXING25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GE MINI_ W08_12_05__ZTC-S600+_16m_En_Cn.B0M.bin) are not same. i try but no result.

[InfinityHelp]

hello!

after each flashing you must make complete format FFS.
after this phone will rebuild EEPROM

[mov009]

respected
sir
i sand this file in infinityboxsupport@gmail.com name chinabluetooth pl upload this file in support area.


-:THANKS:-

[InfinitySupport]

Hello,

There is no mails with flash files received yet.
please, send file again to support@infinity-box.biz

[mov009]

hello
sir agan i sand this file in support@infinity-box.biz this adderes. pl upload this file in support area. and hear it EEPROM FILE;