View Full Version : C55 cable or connector
Hello,
can everyone know where i can find a cable or a connector for siemens C55?
Thanks a lot.
Also i want a connector for antenna for this phone.
hi,
they have all connector and cables include C55 connector and cable.
http://www.gsmdevice.com
You can make yourself a C55 connector using connector for C2/3/4x phones.Don`t be lasy:)
The only that i can make is more slim connector or needed and change in the pinout?
Only make it slim,nothing else.
callinas
11-10-2002, 03:18
hoe you do the pin out changing using a conector of x35, what pinouts we have to change
callinas
11-10-2002, 03:19
.
SychoUnlock
11-10-2002, 16:33
HERE IS THE C55 PINOUT TESTED 100% BY ME
Pin1 = +5v (vcc charge)
Pin2 = GND (mass)
Pin3 = DATA Out = (Pin5 of the old)
Pin4 = DATA in = (Pin6 of the old)
Pin5 =? (Pull down = 112K)
Pin6 =? (Pull down = 112K)
Pin7 =? (Pull down = 112K)
Pin8 =? (Pull UP)
Pin9 =? (Pull UP)
Pin10 =? (Pull UP)
Pin11 = Ext. Micro GND
Pin12 = Ext. Micro input
simply u must replase 5 pin 0n x45 to 3 pin on x55, and pin6 to4
Hello again,
after about 1,5 month it is posible to find in the net data cable for siemens C55 or needed again to make a customization in an old siemens connector?
Hi, you can get data cable for siemens c55 in this page:
http://www.gsm-technology.com/index/other,en,EUR,details,id_gr,14,id_pr,631.html
There are two models, that one and other with ignition:
http://www.gsm-technology.com/index/other,en,EUR,details,id_gr,14,id_pr,632.html
See you.
Adeu.
@Bogi
cant make c55 cable just making it slim .. i did tht it wont works
callinas
01-05-2003, 13:41
Why don't you reed the posts:
"simply u must replase 5 pin 0n x45 to 3 pin on x55, and pin6 to4"
Hello,
If u need heap cable C/S 55 cable , just visit www.DaysGSM.com
BR,
DaysGSM
huyentran
01-08-2003, 07:24
hi
C55 has 384kb memory inside, as M50. After make a slim calbe, I can use some software to test calbe.
With S35explorer I can upload logo, read phone book, read SMS but cannot upload melody
With Data exchange software, I can read all folder inside it, ex: Internet, Java, bitmap, ..., but when I click in any folder, Computer cannot access it, just a error message : No connection...After shutdown computer, phone, do it again and the same problem
Anyone has solution for access flex memory, please help
I have many polysound for it but cannot load in to phone
Thank in advanced