remove security code

[prem2007]

ps sir how to remove security code

==== log opened: [11/11/2008 2:33:45 PM] ====
Application: C:\Program Files\InfinityBox\PinFinder\PinFinder.exe
Initializing...
software version: 1.15
Smart-Card S/N: ----
Smart-Card firmware version: 0111
Initializing PinFinder...
Initializing database...
base database version: 01
user database version: 01
Loading configuration...
Initializing cable list...
Initializing platforms...
Initialization finished
Language selected: English
COM4 ready
searching adapter at COM4...
adapter found, version: 2000
S/N: 456467687------------
Done
Initializing...
Done.
Initializing...
Press and HOLD phone Power button now !
detecting pins...
failed to detect pins
time required: 110 sec
Power Off !
Set parameter to value 20 (or more) and repeat operation "Finder activation tries"
software version: 1.15
cable type: 1x18 (L18A)
platform: CPU independent (autodetect) algorithm
searching adapter at COM4...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 5
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Phone should be Powered-On !
Power-On phone now and press "Ok"
Be sure that phone is not in sleep mode during pinout detection !
Press any phone key from time to time to wake-up phone.
detecting pins...
detected baudrate: 115200
result: Rx:6 Tx:8
time required: 113 sec
Power On !

[InfinitySupport]

Hello,

Press "clear use code" button.

[prem2007]

Hello,

Press "clear use code" button.
please give some more information .. where is( Press "clear use code" button) i didnot understand.plz help.

[sharmin]

after detecting the pinout via pinfinder , now u should open ur infinity shell and select the proper module /model then u will found ur desired command like user lock or sp lock or flash etc ....