Fly Hi SLDR

[Black_Daimond]

COM8 [VCP0] selected
Action: read codes
unlock method: read codes
Model: Fly-Hi-SLDR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6219:8B02:8B01]...
CPU: MT6219
chip: 0031:5541:F9C4
CPU: MT6226MA detected
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226M,E02
Date: 2005.04.12
Version: 1.0
Version: SL900A.05C.W06.08.MP.V72.F2
Version: ESL6227_05C_HW
60 byte(s) read
imei: 35274502018577
connection Ok
208 byte(s) read
Phone lock: Off
Network lock: On
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
NP code: 38920124/83291042
locked to: FFF-FF
NP of SP: 204-F8
Phone code: 1111
Finished, time used: 12 sec
Remove/Install battery now !



Phone is asking for master code

[InfinitySupport]

Hello,

Make full flash backup for emergency case.
Make unlock with "smart fast" mode.

[Black_Daimond]

I did unlock Method: Standard

[Black_Daimond]

COM8 [VCP0] selected
module v2.40
Device: Fly-Hi-SLDR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "sp-unlock"
unlock method: standard
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8B02:8B01]...
CPU: MT6219
detected CPU: MT6226MA
chip: 0031:5541:F9C4
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: B0001D00000000:B0001D00000000
flash: Sharp Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: SL900A_KPN_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_0 8_MP_V72_F2.BIN
ver. sw 2: SL900A.05C.W06.08.MP.V72.F2, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[SL900A_KPN_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_0 8_MP_V72_F2.BIN]...
file saved: C:\Program Files\InfinityBox\MModule\eeprom[SL900A_KPN_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_0 8_MP_V72_F2.BIN]_20081111-171411.B0E.bin
flash: B0001D00000000:B0001D00000000
Backup required data Done
Write ...
flash: B0001D00000000:B0001D00000000
Write: eeprom
Write Done
Finalization ...
Finalization Done
Finished, time used: 514 sec
Remove/Install battery now !

[Black_Daimond]

And its unlocked, thanks once again to infinity