lg kg195 lock code

[neetika99]

COM1 [VCP0] selected
Action: read codes
unlock method: read codes
Model: LG-KG195
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:D941:5494
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: 7S7332IN00-001-R1H
Version: FP_0620
60 byte(s) read
imei: -------------------section Ok
208 byte(s) read
Phone lock: On
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 199201
Finished, time used: 13 sec
Remove/Install battery now !
here is the comp. logs for lg kg195 user code.thanks to infinity again:D

[msashami]

Phone code: 199201
what is this

[neetika99]

Phone code: 199201
what is this
user lock....changed by custmore:Dsuccessfull readed with infinity:D

[InfinitySupport]

Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

[mobile_hotman]

user lock....changed by custmore:Dsuccessfull readed with infinity:D

Bro how did u do that i mean with USB cable or wat???
wats the procedure plzz tell me in detail,,,,Thanx BR

[InfinitySupport]

Bro how did u do that i mean with USB cable or wat???
wats the procedure plzz tell me in detail,,,,Thanx BR

Hello,

Here is an instruction how to get cable/pinout information:

1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout (Rx/Tx/Gnd pins and other information)

Here is an example of information given by Infinity-Box Shell:

http://www.infinity-box.com/download/public/Infinity-Box_shell_v126.jpg

Here is information how to build your own cable:
http://www.gsmhosting.com/vbb/showthread.php?t=342807


How to write flash (upgrade/downgrade firmware, change language):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Flash" page and load required files
8. press "Write" button and follow instruction given by software


How to read flash:

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "Read flash" (or "Read full flash") button and follow instruction given by software


How to unlock (remove sp-lock, provider lock etc.):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "SP-Unlock" button and follow instruction given by software


How to reset/format ffs (reset setting to default values, repair freez/restart etc.):
- at first try to make "safe format" (if this option exist)
- if "safe" option is not works try to make "complete" format (if this option exist)

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. select format mode "safe" or "complete" (if mode is available)
9. press "Reset" or "Format" button and follow instruction given by software