Infinity box new firmware detected

[mov009]

CHINA MODEL CECT K328 NEW FIRMWARE DETECTED.

HEAR IS LOG:-

COM5 [VCP0] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9D5D:0107
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.CD3E0A12.[K328_5B_PCB01_GPRS_MT6226_S01.SW00.1.BIN_C0D66A02].rpl
New firmware detected (2.69) :
K328_5B_PCB01_GPRS_MT6226_S01.SW00.1.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: CD3E0A12
identification#1 protocol ver: 04
ver. sw 1: K328_5B_PCB01_GPRS_MT6226_S01.SW00.1.BIN
ver. sw 2: K328_5B.SW00.1, FD95293F
ffs offset/size: 00800000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000

Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation

Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address confirmed by user: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[K328_5B_PCB01_GPRS_MT6226_S01.SW00.1.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash[K328_5B_PCB01_GPRS_MT6226_S01.SW00.1.BIN]_20081120-133112.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_CD3E0A12_K328_5B_PCB01_GPRS_MT6226_S01.S W00.1.BIN_C0D66A02_20081120-133121.B0X.bin
Finished, time used: 853 sec
Remove/Install battery now !

[mov009]

HEAR IS FILE LINK:- deleted

[InfinitySupport]

Dear Friend,

Thank you very much for your help, but please, in future please do not post links to files in forum, send files or links to support e-mail.
This helps us to serve our customers much more faster and better !

Please, check log text given by software:

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)


We have asked our dear users to send files (or links) to e-mail but not post links in public forum !

Thank you very much for your kind understanding and cooperation !