cnokia rh 37

[maanarman]

power off after few second i was complet format but not solve this problme plz help log is below



COM6 [VCP0] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:4741:576C
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.1DF8AB7F.[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN_29E52E20].rpl
New firmware detected (2.69) :
MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 1DF8AB7F
identification#1 protocol ver: 04
ver. sw 1: MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN
ver. sw 2: MAUI.05C.W06.16, DFD11AD6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN]_20081121-010523.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_1DF8AB7F_MTK26B_05C_PCB01_GPRS_MT6226_S0 1.MAUI_05C_W06_16.BIN_29E52E20_20081121-010547.B0X.bin
Finished, time used: 248 sec
Remove/Install battery now !

[LoveLess]

power off after few second i was complet format but not solve this problme plz help log is below



COM6 [VCP0] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:4741:576C
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.1DF8AB7F.[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN_29E52E20].rpl
New firmware detected (2.69) :
MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 1DF8AB7F
identification#1 protocol ver: 04
ver. sw 1: MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN
ver. sw 2: MAUI.05C.W06.16, DFD11AD6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16.B IN]_20081121-010523.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_1DF8AB7F_MTK26B_05C_PCB01_GPRS_MT6226_S0 1.MAUI_05C_W06_16.BIN_29E52E20_20081121-010547.B0X.bin
Finished, time used: 248 sec
Remove/Install battery now !


i think u need full backup of working phone...flash and eeprom.. i checked it but now exist.. but i have Nckia flash file.. but it is different then ur fw...

flash[E558_MY1F8P6311_E558_GPRS_MT6226_S01.V23_01_1.BIN]_20080821-191218.B0M
eeprom[E558_MY1F8P6311_E558_GPRS_MT6226_S01.V23_01_1.BIN]_20080821-185859.B0E

good lucks...

[frurqan12]

but sir i don,t have same model plz shaire link of fw

[maanarman]

hello sir plz helpppppppppppppp

[InfinitySupport]

Hello,

Did you tried to make 112/emergency call without sim card ?
What is the results ?

[maanarman]

112 to calling is ok sir

[InfinitySupport]

Hello,

You can try to flash phone with other firmware with version similar to MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16

[maanarman]

sir if will be dead i will return this mobile i don,t want to risk

[InfinityHelp]

sir if will be dead i will return this mobile i don,t want to risk

hello!

if you will make full backup (read full flash operation)- there will be no any risk. in emergency case you will be able restore it original state

[maanarman]

how can restore plz tell after this i will flash with this file MTK26B_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16

[InfinityHelp]

hello!

backup restore is done via "load firmware" > "write"
select backup which was previously stored