View Full Version : Can anybody share this file plese.
Can anybody pl share e516_hjw_e516_gprs_mt6226_s01.00_0.bin this cect818 model file.because this file not in support area. And i can't backup this file. So pl help.
InfinityHelp
11-22-2008, 19:59
hello!
you can try this one: flashfiles/ChineseMiracle/_MT6226/E516_ZDB_E516_GPRS_MT6226_S01.00_0_16m_.B0M.bin
after you backup your existing version for emergency case
yawarniazi
11-22-2008, 21:13
Can anybody pl share e516_hjw_e516_gprs_mt6226_s01.00_0.bin this cect818 model file.because this file not in support area. And i can't backup this file. So pl help.
Plz don't forget to post result after trying above file.
hello!
you can try this one: flashfiles/ChineseMiracle/_MT6226/E516_ZDB_E516_GPRS_MT6226_S01.00_0_16m_.B0M.bin
after you backup your existing version for emergency case
yes i try this file but no result, set is white light.
InfinityHelp
11-23-2008, 13:53
hello!
try to make format FFS complete.
also, after that worth to try on more similar flash file from our support area:
flashfiles/ChineseMiracle/_MT6226/E516_LDS_SB_CDY2_1_E516_GPRS_MT6226_S01.00_0_16m_. B0M.bin
sir
still no result hear is log:-
==== log: [11/23/2008 8:50:08 PM] ====
COM5 [VCP0] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F14A:D4D4
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.AD45CB04.[E516_LDS_SB_CDY2_1_E516_GPRS_MT6226_S01.00_0.BIN_5 A6D9CD6].rpl
identification#1 detection finished
device-id: AD45CB04
identification#1 protocol ver: 04
ver. sw 1: E516_LDS_SB_CDY2_1_E516_GPRS_MT6226_S01.00_0.BIN
ver. sw 2: E516_LDS_SB_CDY2_1.00.0, 296392A5
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address confirmed by user: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[E516_LDS_SB_CDY2_1_E516_GPRS_MT6226_S01.00_0.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[E516_LDS_SB_CDY2_1_E516_GPRS_MT6226_S01.00_0.BIN]_20081123-205343.B0E.bin
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_AD45CB04_E516_LDS_SB_CDY2_1_E516_GPRS_MT 6226_S01.00_0.BIN_5A6D9CD6_20081123-205602.B0X.bin
Finished, time used: 349 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
InfinityHelp
11-23-2008, 21:07
hello!
sad, but there is no other way to rescue this phone, than find exactly same version
E516_HJW_E516_GPRS_MT6226_S01.00_0
send this firmware for support area too
address is mt62xx@gmail.com