shahzaadbutt
11-23-2008, 08:50
I have tested today Hantel A01 with CECT P168 Cable 100% Working Fine
Format
COM21 [VCP0] selected
module v2.69
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:3914:B597
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: B100_TOSHIBA128M_06A_V1.1
Version: FLCHUANG_06A_HW
detecting structure #2...
0 done
42 byte(s) read
imei: 35014001000448
connection Ok
building list...
done
items to clear: 135
135 of 135 items cleared
building list...
done
0 items remains
Finished, time used: 26 sec
Remove/Install battery now !
IMEI Change
COM21 [VCP0] selected
module v2.69
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350140010004489
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:3914:B597
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: B100_TOSHIBA128M_06A_V1.1
Version: FLCHUANG_06A_HW
detecting structure #2...
0 done
42 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #2...
0 done
42 byte(s) read
verification...
verification done: 35014001000448
Finished, time used: 18 sec
Remove/Install battery now !
Hantel A01 Pinouts = CECT P168 Pinouts
Cable name: Cect-P168
connector_2x5_mini
4: Phone Rx (RJ45 pin 2)
5: Phone Tx (RJ45 pin 3)
6: Gnd
Format
COM21 [VCP0] selected
module v2.69
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:3914:B597
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: B100_TOSHIBA128M_06A_V1.1
Version: FLCHUANG_06A_HW
detecting structure #2...
0 done
42 byte(s) read
imei: 35014001000448
connection Ok
building list...
done
items to clear: 135
135 of 135 items cleared
building list...
done
0 items remains
Finished, time used: 26 sec
Remove/Install battery now !
IMEI Change
COM21 [VCP0] selected
module v2.69
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350140010004489
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:3914:B597
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: B100_TOSHIBA128M_06A_V1.1
Version: FLCHUANG_06A_HW
detecting structure #2...
0 done
42 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #2...
0 done
42 byte(s) read
verification...
verification done: 35014001000448
Finished, time used: 18 sec
Remove/Install battery now !
Hantel A01 Pinouts = CECT P168 Pinouts
Cable name: Cect-P168
connector_2x5_mini
4: Phone Rx (RJ45 pin 2)
5: Phone Tx (RJ45 pin 3)
6: Gnd