Chinese 6070-RH37 Successfully Alive ***

[~ Nawab Traders ~]

Hello
Today i gott a dead chinese copy nokia 6070.
I use just format and unit successfully alive with infinity.
THANKS TO INFINITY TEAM. ;););)
Look log below.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

COM65 [Serial2] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:56DB:000C
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
230400
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN
ver. sw 2: MAUI.07A.W07.36.27, 00000000
ffs offset/size: 00700000/00100000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00700000
flash: 01227E22102201:2AEA0000000000
checking area [00000000]: 00000000-007FFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00700000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00100000
ffs chip: 00
eeprom/ffs area: 00000000:00700000-007FFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN]_20081123-165118.B0E.bin
flash: 01227E22102201:2AEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22102201:2AEA0000000000
Finalization Done
Finished, time used: 78 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[InfinitySupport]

Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

[Mike Mshanga]

Hello
Today i gott a dead chinese copy nokia 6070.
I use just format and unit successfully alive with infinity.
THANKS TO INFINITY TEAM. ;););)
Look log below.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

COM65 [Serial2] selected
module v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:56DB:000C
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
230400
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN
ver. sw 2: MAUI.07A.W07.36.27, 00000000
ffs offset/size: 00700000/00100000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00700000
flash: 01227E22102201:2AEA0000000000
checking area [00000000]: 00000000-007FFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00700000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00100000
ffs chip: 00
eeprom/ffs area: 00000000:00700000-007FFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[HEXING23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36 _27.BIN]_20081123-165118.B0E.bin
flash: 01227E22102201:2AEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22102201:2AEA0000000000
Finalization Done
Finished, time used: 78 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
What module did you use? I have tried chinese miracle module it can't fomat.

[InfinityHelp]

What module did you use? I have tried chinese miracle module it can't fomat.

hello!

what error do you get? maybe you using wrong pinout or cable is assembled wrong?

[Mike Mshanga]

hello!

what error do you get? maybe you using wrong pinout or cable is assembled wrong?
It couldin't just connect. I used the right rx and tx on the pcb with rj45 2 and 3 respectively.Anyway my client has picked the phone, i will try again when i get another set.