View Full Version : w220 repair "telephone non autorise" orange
I'm trying to repair and unlock the phone, firstly i tried to unlock the phone with
infinty and it fails then i tried with vygis it seems to be successful but now Phones imei shows an empty field, if i press *#06* and by putting a sim card it shows "telephone non autorise" repair function don't works here is the log.
COM1 [Serial0] selected
module v1.29
Device: Motorola-W220
"advanced chip detection" active
Action: repair
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89886400010001:89886400000000
flash: Intel Intel std [def 007Fx010000 0008x002000] 8Mb
software version: 1240-000
software version: SCY-7-
Check hardware done
Read data...
reading Motorola-W220_eeprom_calibration-1...
file saved: C:\Programme\InfinityBox\HModule\Motorola-W220_eeprom_calibration-1_20081124-005504.6AE.bin
Read data done
Check data...
Check data done
Writing...
.error: required data not found or unknown eeprom structure
Writing fail
error: operation failed
Finished, time used: 17 sec
Remove/Install battery now !
I'm trying to repair and unlock the phone, firstly i tried to unlock the phone with
infinty and it fails then i tried with vygis it seems to be successful but now Phones imei shows an empty field, if i press *#06* and by putting a sim card it shows "telephone non autorise" repair function don't works here is the log.
COM1 [Serial0] selected
module v1.29
Device: Motorola-W220
"advanced chip detection" active
Action: repair
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89886400010001:89886400000000
flash: Intel Intel std [def 007Fx010000 0008x002000] 8Mb
software version: 1240-000
software version: SCY-7-
Check hardware done
Read data...
reading Motorola-W220_eeprom_calibration-1...
file saved: C:\Programme\InfinityBox\HModule\Motorola-W220_eeprom_calibration-1_20081124-005504.6AE.bin
Read data done
Check data...
Check data done
Writing...
.error: required data not found or unknown eeprom structure
Writing fail
error: operation failed
Finished, time used: 17 sec
Remove/Install battery now !
You need Full Flash Phone.
After Unlock.
If not solved repai only IMEI.
BR
Haicha
Repair imei don't work I will try Full Flash thx
NADEEM GONDAL
11-24-2008, 07:50
try just repair fone.
;)
can't find full backup to test it
bilal_mobile
11-24-2008, 10:29
I'm trying to repair and unlock the phone, firstly i tried to unlock the phone with
infinty and it fails then i tried with vygis it seems to be successful but now Phones imei shows an empty field, if i press *#06* and by putting a sim card it shows "telephone non autorise" repair function don't works here is the log.
COM1 [Serial0] selected
module v1.29
Device: Motorola-W220
"advanced chip detection" active
Action: repair
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89886400010001:89886400000000
flash: Intel Intel std [def 007Fx010000 0008x002000] 8Mb
software version: 1240-000
software version: SCY-7-
Check hardware done
Read data...
reading Motorola-W220_eeprom_calibration-1...
file saved: C:\Programme\InfinityBox\HModule\Motorola-W220_eeprom_calibration-1_20081124-005504.6AE.bin
Read data done
Check data...
Check data done
Writing...
.error: required data not found or unknown eeprom structure
Writing fail
error: operation failed
Finished, time used: 17 sec
Remove/Install battery now !
u just chang its imei number.100% ok
InfinitySupport
11-24-2008, 13:04
@abros
1. flash phone with any "repair eeprom" file from support area
2. make "repair" operation again
@abros
1. flash phone with any "repair eeprom" file from support area
2. make "repair" operation again
now phone works without failure message but now Problem is can't write original phone imei
"advanced chip detection" active
Action: imei repair
new imei: xxxxxxxxxxxxxxxx
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89886400010001:89886400000000
flash: Intel Intel std [def 007Fx010000 0008x002000] 8Mb
software version: 1240-000
software version: SCY-7-
Check hardware done
Read data...
Read data done
Check data...
Check data done
Writing...
...................
unknown firmware, read flash and send to support
Writing fail
error: operation failed
Finished, time used: 14 sec
Remove/Install battery now !
InfinitySupport
11-24-2008, 15:51
Hello,
Flash phone with this firmware: \flashfiles\Motorola\W220\1240\W220_Main_7-1240-000_2006-Dec-13.6AM.bin
Is original imei come back ?
@InfinitySupport
thx for your help after flashing the main part the original imei comes back.