View Full Version : Siemens C55 software problem!
pchelpsi
11-22-2002, 18:34
Hi there!
Can I unlock Siemens C55 with the same cable and the same program as Siemens C45?
If not, any advice, suggestion, ...????
Thanks in advance for any kind of help.
Regards,
Dejan
no, u can't
:(
and me to
:)
Jacekpoland
11-24-2002, 09:52
you have to change some pins
Pin1 = +5v (vcc charge)
Pin2 = GND (mass)
Pin3 = DATA Out = (Pin5 of the old)
Pin4 = DATA in = (Pin6 of the old)
Pin5 =? (Pull down = 112K)
Pin6 =? (Pull down = 112K)
Pin7 =? (Pull down = 112K)
Pin8 =? (Pull UP)
Pin9 =? (Pull UP)
Pin10 =? (Pull UP)
Pin11 = Ext. Micro GND
Pin12 = Ext. Micro input
pchelpsi
11-24-2002, 11:51
Need a new cable an which software should I use?
Thanks in advance and have a nice day.....
Dejan
Winner58
11-24-2002, 12:33
Originally posted by pchelpsi
Hi there!
Can I unlock Siemens C55 with the same cable and the same program as Siemens C45?
If not, any advice, suggestion, ...????
Thanks in advance for any kind of help.
Regards,
Dejan
wrong section!!!
moved from Siemens C45,Mx50,A50
3 warning - points.