View Full Version : alcatel be1 power on prob.
when i power on with out sim in it.. i power up normally saying insert sim messeage... but with sim power on than off again same time......
any body knows the solution for it....
could it be a s.w. prob... or hardware....
br
i guess is software
use raklm solution for it
save with mcomm original file from phone 00FC000 to 00FFFFF
flah it with be 1 flash same soft version
writhe original partial and u will have a working phone
@Alinus
Did you tested this solution?
I am glad
@s4sajii
I must tell you it is software problem but......
In your case .teh zone is dammaged
Sorry
I had this situation and after flashed phone with same version and put it back original .teh in phone same situation
without sim phone power on
with sim power on and aftre that power off.
I think is .teh dammaged.
So if you want to make this phone work you need to make your own .teh files about 20-30 files
you need to write only this files of 16,384 Bytes one by one with mcomm sw and test it
If phone works ok 3 min then all is ok
if not write an other .teh
make this untill phone works ok
Remmember
You need same flash with same .teh files same version
If you put .teh from an other version phone do not power on.
BR
Rak|m
how i will make the teh files ? can u give me details please or any working link for them ?
try this sw:
www.MASTERGSM.net (http://www.mastergsm.net/IRINeL-repair.zip)
and posted result
IRINeL
AlfamobiL Team
ROMANIA