[Solution] IMEI: Unknown | ICCID: Unknown | No WiFi | etc...

[~Leo~]

Posted From Other Forum &Tested by 1 of my Friends &Not tested By Me
Hope this can help


[Solution] IMEI: Unknown | ICCID: Unknown | No WiFi | etc...
Before starting:
Be sure you have the same problem as I had. I had "IMEI unknown" and Not "IMEI 0049...."
I had a new iPhone with 1.1.1 crashed after first try to activate with touchfree


Result

My iPhone was bricked, but it's working again. In some other Threads are some info's how you can unlock
your iPhone also with the terminal. If you want to unlock it also, be sure to copy the needed Apps before
updating to FW 1.1.1. BC iBrickr is not working with this FW.


My iPhone

- Bricked 1.1.1


Sympthom's

- IMEI: Unknown
- ICCID: Unknown
- Repair needed
- No Audio
- No WiFi


What I have done, to get this status

- Jailbreak
- touchfree breakdown while using
- use touchfree alpha and also breakdown


Possible Rootcause

- Mobile-Firmware corrupt


What did I use to fix it
All needed things here (w/o FW 1.0.2 -> get with iTunes): hXXp://rap1d5hare.com/files/65099379/Lettys-Fix-Selection.rar.html

- Pacay
- APPTappInstaller.exe
- iBrickr_0.91
- BSD Subsystem (with iBrickr)
- UIctl (with iBrickr)
- Mobile Terminal VT100 (with iBrickr)
- ieraser
- bbupdater
- secpack
- ICE03.14.08_G.eep
- ICE03.14.08.fls



What I have done to fix this status

0) If your iPhone does not have FW 1.0.2 -> flash it to FW 1.0.2 (Yellow triangle on your iPhone)

0.1) Remove your SIM!!!

0.2) Only if your Phone is locked use PACAY zu activate it

0.3) If you have FW 1.0.2 and Yellow triangle on your iPhone goto Step 1.)

0.4) If you have 1.0.2 but not yellow triangel press ON/OFF-Button and Home Button. After 10 sec.
release ON/OFF-Button. After 15 sec. release Home-Button. Connect to iTunes. Click away all massages.
Your iPhone-Disply should be black. If your Display is not Black goto 0.4) again

0.5) Close iTunes and all iTunes-processes

1.) Run AppTappInstaller.exe
1.1) Running will be failed first time. close AppTappInstaller
1.2) Connect to iTunes. If Error-Message apperars close iTunes and all processes again.
1.3) Run AppTappInstaller again. If success goto 2.) else to 1.)

2.) Start "(CLICK HERE) activate.bat" (from downloaded PACAY)
2.1) Follow all instructions and also the reboot
2.2) Now you have an activated 1.0.2 iPhone goto 3.). if not start with 0.) again

3.) Start iBrickr and select Applications and follow ALL the instructions to install Apps
3.1) Install the following Apps: BSD Subsystem, UIctl, Mobile Terminal VT100
3.2) Be sure the Apps are installes. After that you should see the Terminal- and UIctl-Icon
3.3) Install with iBrickr-Files-Upload-Fuction the following files in "/usr/bin/"
ieraser, bbupdater, secpack, eep-file and fls-file -> goto 4.)

4.) Tap the Terminal-App on the iPhone and input the following commands
cd /usr/bin
chmod +x *.*

4.1) Press home-Button and start Uctl (Do only the steps here descriped!!!!)
4.2) Tap on com.apple.CommCenter -> tap "unload -w"
4.3) Tap on com.apple.mobile.lockdown -> tap on "stop"
4.4) Press Home-button and start Terminal again
4.5) Type following commands
cd /usr/bin
./ieraser (-> iphone does something, read the results)
cd /usr/bin
./bbupdater -f *.fls -e *.eep -> firmware is flashed
4.6) If you want to unlocking with apps and Terminal, do it know. Info's in other Threads!!!

5.) If everthing was quitted with O.K. (Read the results!) press ON/OFF-Button and Home-Button.
After 10 sec. release ON/OFF-Button. After 15sec release Home-Button
5.1) Connect to iTunes. Hold Shift-Key down and press on restore -> flash FW 1.1.1 to your iPhone


Source is HEre:
http://hackint0sh.org/forum/showthre...ght=Commcenter

[emad1999]

you are old man !

what is this now all iphones 2.2 and 2.1

who care that your 1.1.1

plz back to your sleep again

[kobolt]

best is to upgrade to 2.0.1 then use winpwn 2.5 and create custom firmware .
use bootneuter after restore with custom firmware i think that should solve problem with basband .

[j_t]

this is a solution for iphone IMEI: Unknown | ICCID: Unknown | No WiFi | etc..,pls read properly....

[~Leo~]

Originally Posted by emad1999

you are old man !

what is this now all iphones 2.2 and 2.1

who care that your 1.1.1

plz back to your sleep again

ok m.r genius as long as it's not ur problem so STEP BACK beside this post is from another FORUM &Ihave mentioned that already
2nd Iphone WITH NO WIFI not with 1.1.1 ALLIEN

[~Leo~]

Originally Posted by kobolt

best is to upgrade to 2.0.1 then use winpwn 2.5 and create custom firmware .
use bootneuter after restore with custom firmware i think that should solve problem with basband .

how u will use BOOTNEUTER Without WIFI?
anyway READ CAREFULLY THE POST
&THEN POST REPLYT &STOP STUPID REPLIES AM JUST POSTED THIS TO HELP PEOPLE NOT TO RECIVE STUPID COMMENTS

[j_t]

ya this post are very helpfull......i think you didnt get a iphone like this problem...if u get it u sure use only this way to solve it...

[kobolt]

Originally Posted by ~AhmedLeopard~

how u will use BOOTNEUTER Without WIFI?
anyway READ CAREFULLY THE POST
&THEN POST REPLYT &STOP STUPID REPLIES AM JUST POSTED THIS TO HELP PEOPLE NOT TO RECIVE STUPID COMMENTS

SImple BOOTNEUTER can be included in custom firmware i will post my cutomized firmware with bootneuter . Its easy to do it with WinPwn so before you call someone stiupid educate yourself :P

you can use itunes to flash with custom firmware and after that bootnueter will do the job automatic just wait 3-5 minutes .

[~Leo~]

that's what guide Say cuz i found many topics about no imei solution &I didn't found any details here
thanks for ur info

[kobolt]

by the way solution posted was here was dexcribed many times in hackintosh forum and *****iphone
i know cuz i used it many times

[~Leo~]

Posted From Other Forum &Tested by 1 of my Friends &Not tested By Me
Hope this can help
Source is HEre:
http://hackint0sh.org/forum/showthre...ght=Commcenter
i know man am already said that in ma post

[shedeed]

Good Work Mr. Ahmed
Keep It Up
Regards

[Tatek]

I had an iphone like that and bootneuter freezed when i used it...
old way works..

[shedeed]

Originally Posted by Tatek

I had an iphone like that and bootneuter freezed when i used it...
old way works..

Try To Restore It By Itunes 8 Then Try To Unlock Again
If Not Done Downgarde To 1.1.4 By Itunes 7.5
Then Use Kiphone To Erase U Basband And BootLoader
Then Restore It again By Any Version U Want It
Regards

[SLIPLOCK]

yes but some iphone2g does not allow to restore 1.1.1 firmware....