PDA

View Full Version : Which firmware I need for flash A380i..

Celhack
12-12-2008, 23:23
Hi, I'm new with chineese phones and need know which firm can i use for this model. Also pinout if is possible.
yawarniazi
12-13-2008, 09:24
Post phone's PCB photos here, so we will be able to help you.

Best Regards!
yawarniazi
InfinityHelp
12-13-2008, 20:29
hello!

lets start from checking what CPU it is based.
you either can do this by disassembling phone or by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is supported by Infintiy software.
Celhack
12-16-2008, 17:18
hello!

Lets start from checking what cpu it is based.
You either can do this by disassembling phone or by typing *#0044# and pressing green (send) button.
If you will see "language set: English"- you can be sure, that this phone is supported by infintiy software.

m
mt63058n
0730-lysl
dmp333
Celhack
12-16-2008, 17:33
phone not turn on, only stay loading. Please give me pinout and firmware i need please.
InfinityHelp
12-16-2008, 20:23
hello!

what type connector is used there?
i am asking, because chinese phones with same name may use different connectors/pinouts
Celhack
12-17-2008, 18:26
hello!

what type connector is used there?
i am asking, because chinese phones with same name may use different connectors/pinouts

Same conector of TCL V6, TCL V18, NK 5300, NK 8030 etc....
InfinitySupport
12-17-2008, 20:12
Same conector of TCL V6, TCL V18, NK 5300, NK 8030 etc....

Hello,

How many pins in this connector ?
Celhack
12-19-2008, 03:16
Hello,

How many pins in this connector ?

Hi, phone have 18 pins...
Celhack
12-19-2008, 15:01
Hello,

How many pins in this connector ?

Problem solved, I use pinfinder Rx4 Tx3, real cpu is 6226. Soft is not in support, but I format ffs and phone is fine now. Tk all for answer.