how to formate master cpu

[mobilecraker]

hi
i m formating here a china mtk single cpu but double sim hand set,
but cant able to formate master here is the log



COM4 selected
module v2.71
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:016E:174B
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2C0AC99B.[DSM808_MASTER_PCB01_GPRS_MT6226_S01.M808_H10S21_EN CN.BIN_57038806].rpl
New firmware detected (2.71) :
DSM808_MASTER_PCB01_GPRS_MT6226_S01.M808_H10S21_EN CN.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 2C0AC99B
identification#1 protocol ver: 04
ver. sw 1: DSM808_MASTER_PCB01_GPRS_MT6226_S01.M808_H10S21_EN CN.BIN
ver. sw 2: M808_H10S21_EnCn, F977FCA8
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[DSM808_MASTER_PCB01_GPRS_MT6226_S01.M808_H10S21_EN CN.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[DSM808_MASTER_PCB01_GPRS_MT6226_S01.M808_H10S21_EN CN.BIN]_20081213-163610.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_2C0AC99B_DSM808_MASTER_PCB01_GPRS_MT6226 _S01.M808_H10S21_ENCN.BIN_57038806_20081213-163917.B0X.bin
Finished, time used: 540 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !


regards
mobilecraker

[InfinityHelp]

hello!

can you explane more detailed what you mean by saying "cant able to formate master cpu"?
format log looks OK (successful)

[aswancamel]

hello!

Can you explane more detailed what you mean by saying "cant able to formate master"

i think, it is success,

[mobilecraker]

hello!

can you explane more detailed what you mean by saying "cant able to formate master cpu"?
format log looks OK (successful)

acctually when i insert sim in master slot mobile gets restarts n inserting in slave slot it say only one sim card is dected please move it from slave to master!!

[InfinityHelp]

hello!

try to format second CPU?