kolz07
12-14-2008, 09:10
gud day m8s...
please help me with this phone, there seem no physical damage to the LCD but still it's white screen...
i tried to format it, still the same(white screen w/o startup tone)...
i tried to flash it with it's backup file, still the same(white screen)...(but with the startup tone this time)
could i conclude that LCD is defective?
is there something else i could possibly do to fix this(beside replacing LCD)?
thanks in advance....
after searching for the right pinout, i manage to access the phone....
here's the log....
==== log: [12/13/2008 4:36:02 PM] ====
COM5 [VCP6] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
==== log: [12/13/2008 4:36:37 PM] ====
COM5 [VCP6] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8B02:8B01]...
CPU: MT6219
high speed boot On
detected CPU: MT6226MA
chip: 0031:3AC1:DF02
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
total flash region size: 02000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: X6_PCB02_GPRS_MT6226M_S01.X6+_FLP_06_12_V2_3-TN-MP-5B-QN.BIN
ver. sw 2: X6+_FLP.06.12.V2.3-TN-MP-5B-QN, 00000000
ffs offset/size: 01C00000/003F0000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 01C00000
flash: 01227E223C2200:29EA0000000000
checking area [00000000]: 00000000-01FFFFFF...
eeprom/ffs found near: 01C00000
detecting eeprom/ffs size...
eeprom/ffs size: 00400000
ffs chip: 00
eeprom/ffs area: 00000000:01C00000-01FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[X6_PCB02_GPRS_MT6226M_S01.X6+_FLP_06_12_V2_3-TN-MP-5B-QN.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash[X6_PCB02_GPRS_MT6226M_myphoneT22Duo_S01.X6+_FLP_06 _12_V2_3-TN-MP-5B-QN.BIN]_20081213-173522.B0M.bin
Finished, time used: 4989 sec
Remove/Install battery now !
please help me with this phone, there seem no physical damage to the LCD but still it's white screen...
i tried to format it, still the same(white screen w/o startup tone)...
i tried to flash it with it's backup file, still the same(white screen)...(but with the startup tone this time)
could i conclude that LCD is defective?
is there something else i could possibly do to fix this(beside replacing LCD)?
thanks in advance....
after searching for the right pinout, i manage to access the phone....
here's the log....
==== log: [12/13/2008 4:36:02 PM] ====
COM5 [VCP6] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
==== log: [12/13/2008 4:36:37 PM] ====
COM5 [VCP6] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8B02:8B01]...
CPU: MT6219
high speed boot On
detected CPU: MT6226MA
chip: 0031:3AC1:DF02
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
total flash region size: 02000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: X6_PCB02_GPRS_MT6226M_S01.X6+_FLP_06_12_V2_3-TN-MP-5B-QN.BIN
ver. sw 2: X6+_FLP.06.12.V2.3-TN-MP-5B-QN, 00000000
ffs offset/size: 01C00000/003F0000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 01C00000
flash: 01227E223C2200:29EA0000000000
checking area [00000000]: 00000000-01FFFFFF...
eeprom/ffs found near: 01C00000
detecting eeprom/ffs size...
eeprom/ffs size: 00400000
ffs chip: 00
eeprom/ffs area: 00000000:01C00000-01FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[X6_PCB02_GPRS_MT6226M_S01.X6+_FLP_06_12_V2_3-TN-MP-5B-QN.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash[X6_PCB02_GPRS_MT6226M_myphoneT22Duo_S01.X6+_FLP_06 _12_V2_3-TN-MP-5B-QN.BIN]_20081213-173522.B0M.bin
Finished, time used: 4989 sec
Remove/Install battery now !