bug ? bug? bugss need to clear

[idrisbigdaddy]

i found a bug @ infinity pana01.exe update .....starting from the day i upgrade dongle and download the new pana01.exe software not connecting with ZTE A61,A66 and A65 pls check the module now ...pls

[Faisal_Computer]

no buddy more post a problem like you so Please make sure that is every thing is SOUND CLEAR on your side
Please post a log ..........

Br

Faisal_Computer

[geriaf]

MModule too have bugs, when repair imei or flash to alcatel c701 or c717 dont finish display an error of writting. i use a old version to do this models. please fix this bug.

B.r

[idrisbigdaddy]

no buddy more post a problem like you so Please make sure that is every thing is SOUND CLEAR on your side
Please post a log ..........

Br

Faisal_Computer
nothing like log ok? see the phone is not connected to the software through cable.....usb to serial, com cable, usr cable all type of cable is not connected to the software.....i beleive is bug?

[Faisal_Computer]

MModule too have bugs, when repair imei or flash to alcatel c701 or c717 dont finish display an error of writting. i use a old version to do this models. please fix this bug.

B.r

nothing like log ok? see the phone is not connected to the software through cable.....usb to serial, com cable, usr cable all type of cable is not connected to the software.....i beleive is bug?

Infinity will see

Br

Faisal_Computer

[InfinitySupport]

MModule too have bugs, when repair imei or flash to alcatel c701 or c717 dont finish display an error of writting. i use a old version to do this models. please fix this bug.

B.r

MModule v2.54 released, this problem fixed: http://forum.gsmhosting.com/vbb/showthread.php?t=652534

[InfinitySupport]

i found a bug @ infinity pana01.exe update .....starting from the day i upgrade dongle and download the new pana01.exe software not connecting with ZTE A61,A66 and A65 pls check the module now ...pls

There is no bugs with software, I strongly suggest you to check your cable.

Also if you don't post operation log this means that you never tried anything, you just write strange words without any reason.
Why so ?

[GFTELECOM]

There is no bugs with software, I strongly suggest you to check your cable.

Also if you don't post operation log this means that you never tried anything, you just write strange words without any reason.
Why so ?
:confused: hi i believe is a bug because i try to change cable but the software can't connect to the phone is screened "COM4 selected
module v1.58
Device: ZTE-A61
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
"
and nothing i try to press power button for a very long time but don't works

[GFTELECOM]

no buddy more post a problem like you so Please make sure that is every thing is SOUND CLEAR on your side
Please post a log ..........

Br

Faisal_Computer
this is the log

COM4 [VCP0] selected
module v1.58
Device: ZTE-A61
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
error: wrong boot answer #1:
Release Power button now
Boot Failed
Finished, time used: 15 sec
Remove/Install battery now !

[Faisal_Computer]

this is the log

COM4 [VCP0] selected
module v1.58
Device: ZTE-A61
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
error: wrong boot answer #1:
Release Power button now
Boot Failed
Finished, time used: 15 sec
Remove/Install battery now !

hi man did you try it with this update ?

MModule v2.54 released, this problem fixed: http://forum.gsmhosting.com/vbb/showthread.php?t=652534

test and post results

Br

Faisal_Computer

[GFTELECOM]

hi man did you try it with this update ?



test and post results

Br

Faisal_Computer
ok i try and i post the results

[Faisal_Computer]

ok i am waiting for your results
Br
Faisal_Computer

[GFTELECOM]

ok i am waiting for your results
Br
Faisal_Computer
sorry i dont see ZTE a 61 modele in the list:confused:

[InfinitySupport]

this is the log

COM4 [VCP0] selected
module v1.58
Device: ZTE-A61
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
error: wrong boot answer #1:
Release Power button now
Boot Failed
Finished, time used: 15 sec
Remove/Install battery now !


Hello,

1. try to adjust port settings:
http://www.infinity-box.com/download/public/Fix_Moto-c113_c114_c115_c116_c117_c139_etc_connection_probl em.jpg

2. try to use ordinary COM port cable, not RJ45 cable

What is the results ?

[GFTELECOM]

Hello,

1. try to adjust port settings:
http://www.infinity-box.com/download/public/Fix_Moto-c113_c114_c115_c116_c117_c139_etc_connection_probl em.jpg

2. try to use ordinary COM port cable, not RJ45 cable

What is the results ?
soryy this action dont works:confused:
i try with with the pana v 1.53 but it the same problem

[GFTELECOM]

Hello,

1. try to adjust port settings:
http://www.infinity-box.com/download/public/Fix_Moto-c113_c114_c115_c116_c117_c139_etc_connection_probl em.jpg

2. try to use ordinary COM port cable, not RJ45 cable

What is the results ?
this is a zte a61 model that a can connect with infinity box and some information about specification
imei:353008025419587
s/n:322583180273
firmware:EF-CF-TELECEL-P108A11(S)V1.0.0B01
sim_lock-status: get control profile failed
network lock info:no NO-LOCK info

[InfinitySupport]

soryy this action dont works:confused:
i try with with the pana v 1.53 but it the same problem

Hello,

Try to select other model (f.e. ZTE-225 or other) and try to read flash from your phone. Let's see results.

More details is here: http://forum.gsmhosting.com/vbb/showthread.php?t=652670

[GFTELECOM]

Hello,

Try to select other model (f.e. ZTE-225 or other) and try to read flash from your phone. Let's see results.

More details is here: http://forum.gsmhosting.com/vbb/showthread.php?t=652670
sorry i yry it but don't work:confused:
COM4 [VCP0] selected
module v1.58
Device: ZTE-225FM
Checking data, wait...
Action: read flash
Boot ...
Press and HOLD Power button now !
error: wrong boot answer #1:
Release Power button now
Boot Failed
Finished, time used: 12 sec
Remove/Install battery now !

[muktar]

i expirience the same thing mean i ca
nt unlock a61 zte. please urgent help please

[deepakgarg]

i expirience the same thing mean i ca
nt unlock a61 zte. please urgent help please

please post operation log that will b a lot helpful

[XTS3000]

COM11 [Serial2] selected
module v1.58
Device: ZTE-A35
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !

i have 2pcs zte a35 waiting to unlock

problem press power on only nothing happen, i have change comport seting, modif cabel to prolific com emu, using pinfinder, modif cable to com1, modif to rj45 using jaf/ufs com emu. haaa.. tied.


br,

[InfinitySupport]

Hello,

As I can see you have no any connection. In most cases it's a result of damaged cable.
Please, double check your cable and check that phone connector is not damaged.

[XTS3000]

Hello,

As I can see you have no any connection. In most cases it's a result of damaged cable.
Please, double check your cable and check that phone connector is not damaged.


no, it's not cable damage, i direct solder to board pin using rj45 cabel non connector and no respon when booting :confused:.


br,

[GFTELECOM]

Hello,

As I can see you have no any connection. In most cases it's a result of damaged cable.
Please, double check your cable and check that phone connector is not damaged.
hi whi you dont accept is a new version if is a new version make something

[InfinitySupport]

@XTS3000
Did you tried to swap Rx/Tx wires ?

@GFTELECOM
What new version you talk about ?
Who told you about new version ?

[GFTELECOM]

@XTS3000
Did you tried to swap Rx/Tx wires ?

@GFTELECOM
What new version you talk about ?
Who told you about new version ?
a new version of ZTE a 61

[InfinitySupport]

@GFTELECOM
Why you talk about "A61 new version" when you reply to user's message about A35 ?
Please, tell me more about that "A61 new version".
Did you tried to connect (read flash) this A61 phone like other similar models ?

[jacob magembe]

i have just reset user code of j-max by selecting zte 225 see the log:
module v1.58
Device: ZTE-225, Vodafone-225
Checking data, wait...
Action: reset
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:011A
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225, Vodafone-225_eeprom-static_20081229-150604.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225, Vodafone-225_eeprom-security_20081229-150604.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225, Vodafone-225_eeprom-complete_20081229-150606.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
reset...
done
Write Done
Finished, time used: 19 sec
Remove/Install battery now !

[XTS3000]

pinfinder
====================
software version: 1.17
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM8...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 20
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820013)
result: Rx:1 Tx:2
time required: 0 sec
Power On !

pana 1.6.4
=======================
COM8 selected
module v1.64
Device: ZTE-A35
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820013
loading...
next part...
boot answer: 00
error: unknown bootcode answer:
Release Power button now
Boot Failed
Finished, time used: 6 sec
Remove/Install battery now !

after long time wait,i see improved boot at pana 1.6.4, i try my a35 can boot now, but error in unlock action.



br,

[InfinitySupport]

Hello,
There is a new type of this phone that has boot problem. Our programmers working to solve it now.