View Full Version : mobile ka baap micromax x1i sucessfully flashing
sanjiv kumar
12-19-2008, 18:12
i successfully flashed micromax x1i with fash tool ..
bhogpurmail
12-19-2008, 18:51
Hello, IS this CDMA OR GSM
mukesh mobile
12-30-2008, 11:32
dear please clear that whith tools use for flashing your macromax.
micromax x1i flash complete with spiderman
sanjiv kumar
12-30-2008, 18:39
if any one want help then PM me send ur email ...
zenithgsm
01-08-2009, 10:46
if any one want help then PM me send ur email ...
pleasse send me tx rx for x1i & flash tool
zenithgsm
01-08-2009, 10:47
if any one want help then PM me send ur email ...
pleasse send me tx rx for x1i & flash tool zenithgsm@yahoo.com
sahil2000ind
01-08-2009, 10:53
MICROMAN HAS PCB LIKE CHINESE PCB
SO U CAN USE SPIDERMAN_BOX TO DETECT THE PINOUTS AND CAN USE IT TO FORMAT ALSO
WBR
sahil2000ind
Yes bro...
MicroMax launch in India with 1 Year Warranty. And it seem like Chimies model & working too.
It it easily detect with Spiderman Box & Infinity Box.
InfinitySupport
01-20-2009, 23:25
@amol_sm
Please, if you will have a chance, read flash from good working x1i and send full flash backup (and pinout information) to support@infinity-box.biz
sanjiv kumar
01-21-2009, 16:16
ya i have all pin out and flash file for most popular micromax gsm model , if any one want then PM me....
@amol_sm
Please, if you will have a chance, read flash from good working x1i and send full flash backup (and pinout information) to support@infinity-box.biz
Thankx dear.......
To advoice me that full read flash file & post here detailed info about micromax X1i
Here is the info
Brand - MicroMax
Model - X1i
CPU - MT6223
Sim - Single sim (Gsm)
Connector - 1 x 18 Standard
Rx - 5
Tx - 6
Also here is the Log of full read the flash.
COM4 [VCP2] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:BD1C:000C
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw 1: TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0010.BIN
ver. sw 2: 932318_898_V0010, 00000000
ffs offset/size: 00600000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00600000
flash: 98009600000000:2AEA0000000000
checking area [00000000]: 00000000-007FFFFF...
eeprom/ffs found near: 00600000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00600000-007FFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0010.BIN]...
file saved: C:\Documents and Settings\Amol\Desktop\flash[TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0010.BIN]_20090121-220124.B0M.bin
Finished, time used: 540 sec
Remove/Install battery now !
;)
InfinitySupport
01-21-2009, 17:49
@amol_sm
Thanks a lot for detailed information !
Please, send full flash backup to support@infinity-box.biz
Here is the link of full read flash file of MicroMax X1i
http://www.filefactory.com/file/a033635/n/MicroMax_X1i_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S 00_932318_898_V0010_BIN_bin
Also file has been sent to support@infinity-box.biz
@amol_sm
Please, if you will have a chance, read flash from good working x1i and send full flash backup (and pinout information) to support@infinity-box.biz
i have complain mr infinity support.
shahbs786
08-05-2009, 08:23
mobile ki maa kaun hai reeeeeeeeee