View Full Version : unsupported j132 - boot fail.
dzunlocker
12-30-2008, 18:37
Model : J132
Main code version : 1211-2311_R1AA029
EROM : CXC1250616_R5A038
locked to : virgin mobile France
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
error: operation failed
Finished, time used: 47 sec
Remove/Install battery now !
green bird
12-30-2008, 18:59
some new J132 not supporting now unlock with infinity.
wait may be next update we can do or use another tool(its not free)
haroun02
12-30-2008, 20:12
try keep holdin'
if not setool or scard
malek_bh
12-30-2008, 20:18
Has been successfully unlock using infinity with com port furious-gold
dzunlocker
12-30-2008, 20:58
10x for answers but phone unsupported by other tools (may be can be unlocked by last update of one of these tools but I think 3 credits are too much for J132) in this post i just tried to report unsupported boot to Infinity team.
WBR
10x for answers but phone unsupported by other tools (may be can be unlocked by last update of one of these tools but I think 3 credits are too much for J132) in this post i just tried to report unsupported boot to Infinity team.
WBR
new mcu............waiting for infinity solution
zerofone
01-07-2009, 22:21
please infinity team u must do any thing to this models i hope that
abumu3ed
01-07-2009, 22:56
http://forum.gsmhosting.com/vbb/showthread.php?t=660965
LOUAI2005
01-07-2009, 23:44
hi .............................
COM4 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Sony-Ericsson-J132_eeprom_calibration-1_20090106-233951.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 76 sec
Remove/Install battery now !
ulocked fine 10x infinity team
br louai
zerofone
01-08-2009, 01:04
thanx infinity team really it is the best box
but it gived me some error beacause iam making acable
but it unlocked
COM3 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
warning: wrong cs at 0x067F1000, retry...
read error recovered
warning: wrong cs at 0x067F6800, retry...
read error recovered
warning: wrong cs at 0x067FE000, retry...
read error recovered
file saved: C:\Documents and Settings\zerofone\Desktop\New Folder (2)\Sony-Ericsson-J132_eeprom_calibration-1_20090108-004240.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
warning: wrong cs at 0x06141000, retry...
read error recovered
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 90 sec
InfinitySupport
01-08-2009, 01:37
thanx infinity team really it is the best box
but it gived me some error beacause iam making acable
but it unlocked
COM3 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
warning: wrong cs at 0x067F1000, retry...
read error recovered
warning: wrong cs at 0x067F6800, retry...
read error recovered
warning: wrong cs at 0x067FE000, retry...
read error recovered
file saved: C:\Documents and Settings\zerofone\Desktop\New Folder (2)\Sony-Ericsson-J132_eeprom_calibration-1_20090108-004240.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
warning: wrong cs at 0x06141000, retry...
read error recovered
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 90 sec
Hello,
If errors was recovered there is no any problems.
To avoid communication errors you can try to make your cable wires shorter.
glad to see you back in "normal" ;)
InfinitySupport
01-08-2009, 01:54
Thanks !
In fact I am not so good, I am really shocked how is people can show "white" as "black" and "black" as "white".
I must learn... and it's really good school for me.
:(
Good thing: now I know and I have an experience that it is possible to find a bugs not for CPU bootrom only but for forum rules also.
U are a men of laws also i think ;) BECAUSE U HAVE DELETE ME MY AVETAR NORMALY WITHOUT PROBLEM ;) thx mr
InfinitySupport
01-08-2009, 02:20
U are a men of laws also i think ;) BECAUSE U HAVE DELETE ME MY AVETAR NORMALY WITHOUT PROBLEM ;) thx mr
Hello,
As you can see we have nothing against personally you (or anybody else): http://forum.gsmhosting.com/vbb/showthread.php?t=662174
dzunlocker
01-09-2009, 16:07
Hello,
If errors was recovered there is no any problems.
To avoid communication errors you can try to make your cable wires shorter.
i unlocked J132 with infinity without problems, but there are some unsupported MCUs. I hope that you ll add support for all MCUs ASAP
WBR
i unlocked J132 with infinity without problems, but there are some unsupported MCUs. I hope that you ll add support for all MCUs ASAP
WBR
i agree with you !!
i ve one j132 not unlocked (using infinity or setool)
here log of infinity device:
COM4 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: read full flash
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
error: operation failed
Finished, time used: 47 sec
Remove/Install battery now !
trying to read full flash in order to send it to infinity support gives error !!
more times same result !
help to unlock new version of j132
thanks