>>> LG KP110 Restart Solved <<<

[zeel_zeel]

LG KP110 with restart problem has successfully been repired by Infinity Box.

Thanks to this wonderful team of their excellent support >>>>


COM4 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
921600
Set baud Done
Check flash ...
current eeprom imei: 352008023260687
file saved: C:\Program Files\InfinityBox\LGA\eeprom_352008023260687_LG-KP110_20081230-125607.B1E.bin
....
reading _eeprom-ffs_352008023260687...
file saved: C:\Program Files\InfinityBox\LGA\_eeprom-ffs_352008023260687_LG-KP110_20081230-125745.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 186 sec
Remove/Install battery now !

[InfinitySupport]

LG KP110 with restart problem has successfully been repired by Infinity Box.

Thanks to this wonderful team of their excellent support >>>>


COM4 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
921600
Set baud Done
Check flash ...
current eeprom imei: 352008023260687
file saved: C:\Program Files\InfinityBox\LGA\eeprom_352008023260687_LG-KP110_20081230-125607.B1E.bin
....
reading _eeprom-ffs_352008023260687...
file saved: C:\Program Files\InfinityBox\LGA\_eeprom-ffs_352008023260687_LG-KP110_20081230-125745.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 186 sec
Remove/Install battery now !

Thank you very much for test report !

Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works and what is
possible problems (so we will be able to fix it) and successfully done work.

[dog_baby]

Thanks Again for KP110 restart problem
after try repair Eeprom not fix, full flash with file on support -------> phone okie now
Log here :

==== log opened: [1/7/2009 4:59:41 PM] ====
Application: C:\Program Files\InfinityBox\LGA\LgA.exe
Loading data, wait...
[Infinity Box] v1.36
S/N: 0D05:XXXX
Wait...
Device: LG-KP110
Done
Loading file v.04...
KP110AT-00-V10b-ESA-XX-JUN-10-2008_full_code_alchemy[1].B1M.bin loaded
Testing COM6 at 460800...

==== log: [1/7/2009 5:02:32 PM] ====
COM6 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: flash write
Write: Firmware (code)
Skip: File system
Skip: Alchemy data
Skip: Eeprom
"smart write" active
"keep calibration" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
460800
Set baud Done
Check flash ...
current eeprom imei: 011444001406021
file saved: C:\Program Files\InfinityBox\LGA\eeprom_011444001406021_LG-KP110_20090107-170330.B1E.bin
....
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write: Firmware (code)
calibration area skipped
flash: 01227E22212200:FEEA0000000000
flash: 01227E22212200:F0B0FF00000000
write: 2nd chip area
Write Done
Finished, time used: 661 sec
Remove/Install battery now !

[guru4gsm]

Thanx infinity today solved KP110 Restart Problem by reseting.
Here is the log.


==== log: [2/26/2009 8:35:37 PM] ====
COM3 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
921600
Set baud Done
Check flash ...
current eeprom imei: 352008022128166
file saved: C:\Program Files\InfinityBox\LGA\eeprom_352008022128166_LG-KP110_20090226-203558.B1E.bin
....
reading _eeprom-ffs_352008022128166...
file saved: C:\Program Files\InfinityBox\LGA\_eeprom-ffs_352008022128166_LG-KP110_20090226-203641.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 77 sec
Remove/Install battery now !

[DILIP_MKPKRB]

[QUOTE=dog_baby;4038097]Thanks Again for KP110 restart problem
after try repair Eeprom not fix, full flash with file on support -------> phone okie now
Log here :

==== log opened: [1/7/2009 4:59:41 PM] ====
Application: C:\Program Files\InfinityBox\LGA\LgA.exe
Loading data, wait...
[Infinity Box] v1.36
S/N: 0D05:XXXX
Wait...
Device: LG-KP110
Done
Loading file v.04...
KP110AT-00-V10b-ESA-XX-JUN-10-2008_full_code_alchemy[1].B1M.bin loaded
Testing COM6 at 460800...

==== log: [1/7/2009 5:02:32 PM] ====
COM6 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: flash write
Write: Firmware (code)
Skip: File system
Skip: Alchemy data
Skip: Eeprom
"smart write" active
"keep calibration" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !

just put the batt start restart .....

[DILIP_MKPKRB]

[QUOTE=dog_baby;4038097]Thanks Again for KP110 restart problem
after try repair Eeprom not fix, full flash with file on support -------> phone okie now
Log here :

==== log opened: [1/7/2009 4:59:41 PM] ====
Application: C:\Program Files\InfinityBox\LGA\LgA.exe
Loading data, wait...
[Infinity Box] v1.36
S/N: 0D05:XXXX
Wait...
Device: LG-KP110
Done
Loading file v.04...
KP110AT-00-V10b-ESA-XX-JUN-10-2008_full_code_alchemy[1].B1M.bin loaded
Testing COM6 at 460800...

==== log: [1/7/2009 5:02:32 PM] ====
COM6 [VCP0] selected
module v1.36
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: flash write
Write: Firmware (code)
Skip: File system
Skip: Alchemy data
Skip: Eeprom
"smart write" active
"keep calibration" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !


sir can't boot the device...
what cant i do...
my phone will be restarting continu...

[InfinitySupport]

@DILIP_MKPKRB
Be sure that you have used correct cable/pinout. Double check your cable.

[bhuvanele]

Everything ok, but but have to keep pin no 16 as Rx and 17 as Tx in pinfinder

[satish.smack]

Bro's... i have the same restart problem in my LG kp110 since yesterday

can anybody tell me how to solve this problem....

Pls brother's its very urgent.....

[shakeel145]

use this code 2945*#* your problem solved

[shakeel145]

and make fullfactory setting

[akhil_bbsr]

Bro's... i have the same restart problem in my LG kp110 since yesterday

can anybody tell me how to solve this problem....

Pls brother's its very urgent.....
KP110AT-00-V10b-ESA-XX-JUN-10-2008_full_code_alchemy[1].B1M.

use this file only

[InfinitySupport]

Bro's... i have the same restart problem in my LG kp110 since yesterday

can anybody tell me how to solve this problem....

Pls brother's its very urgent.....

Hello,

Did you tried to reset phone ?

[satish.smack]

use this code 2945*#* your problem solved


I cant even operate my phone its gets immediate restart,then how do we use this code?:confused:

[satish.smack]

use this code 2945*#* your problem solved

I cant use my phone it gets immediate restart, then how can i do the full factory setting?:confused:

[satish.smack]

use this code 2945*#* your problem solved


And one thing i forgot to tell u guys, when i remove my sim card and turn on the phone it works fine it wont get restart, whenever i put the sim card it get restart again n again... n i tried using other sim cards as well..... pls help me

[satish.smack]

Hello,

Did you tried to reset phone ?

No, i didnt do....:rolleyes:

[compue]

i also solve this today, flashing is smooth, so i enjoy it, but one thing i want to clear here, when i installed 2.17a setup and open lg set kp110, it show errror, and window of infinity not open, also when i use old setup, 2.16 it flash sucessfully, what's the problem, how can i solve this problem infinity team, total detail of error i post tomorrow.

[satish.smack]

Yahooooooooooooooooooooooo... i fixed it by using this code 2945#*# n then factory reset...

thanks to every one....