View Full Version : Infinity box power problem
Cellcraft India
12-31-2008, 06:45
I have a infinity box and pinfinder,my problem is very low power out from infinity box.When in measured the power out from Rj45 pin 1 its showing only 3.5 - 3.7 volts.I tried to remove the diode and make jumper as mentioned in pin finder manual,but no change in voltage output.What to do ? please help me.
deepakgarg
12-31-2008, 07:32
I have a infinity box and pinfinder,my problem is very low power out from infinity box.When in measured the power out from Rj45 pin 1 its showing only 3.5 - 3.7 volts.I tried to remove the diode and make jumper as mentioned in pin finder manual,but no change in voltage output.What to do ? please help me.
check pinfinder manual pdf page no.20
c:\Program Files\InfinityBox\Documentation\PinFinder\Infinity-Box_PinFinder.pdf
Cellcraft India
12-31-2008, 07:47
I said i removed diode and made jumper.Still no change in voltage.Its showing only 3.6-3.7 volts
deepakgarg
12-31-2008, 08:03
I said i removed diode and made jumper.Still no change in voltage.Its showing only 3.6-3.7 volts
did u tried instructions on page 21
and how much do you have on your USB port? at least it 4,5 volt.
IkaMazini
12-31-2008, 08:52
same problem, diode removed with instructions on page 21, but .......
Cellcraft India
12-31-2008, 11:02
and how much do you have on your USB port? at least it 4,5 volt.
Usb showing 5 volts,also another infinity is working perfectly in my p.c.Someone from infinity team please help me.
InfinitySupport
12-31-2008, 14:13
Hello,
If you have removed and shorted diode but voltage is still too low there is the next possible problems:
1. PC USB output voltage is too low. Please, check PC USB port voltage
2. You did not shorted diode well, double check it
3. Your box has other PCB type than in pictures in manual, post here good quality PCB photo so we will be able to see PCB type
4. also you can check box PCB by yourself, what to do: just check wires from box USB input, find +V wire and check where is this wire go.
You need to short box USB input voltage pin to box output RJ45 pin-1
Waiting for your results.
Cellcraft India
12-31-2008, 15:22
Thanks for the reply.I'll check and post the reply:)