successfully unlocking J132

[kasrawiz]

COM5 [VCP2] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Sony-Ericsson-J132_eeprom_calibration-1_20081231-172037.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 86 sec
Remove/Install battery now !

thanks you infinity

[sohailkh]

thanks for good infinty test report

thanks infinty team

[tolski]

can you post your cable?schematic...usb or com?

[InfinitySupport]

can you post your cable?schematic...usb or com?

Hello,

Here is an instruction how to get cable/pinout information:

1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout (Rx/Tx/Gnd pins and other information)

http://www.infinity-box.com/download/public/Infinity-Box_shell_v126.jpg

Here is information how to build your own cable:
http://www.gsmhosting.com/vbb/showthread.php?t=342807

[GSM-DOCTOR]

COM1 [Serial0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Sony-Ericsson-J132_eeprom_calibration-1_20090105-233340.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 75 sec
Remove/Install battery now !

[vjohn456]

COM5 [VCP1] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
812500
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Sony-Ericsson-J132_eeprom_calibration-1_20090107-171408.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 65 sec
Remove/Install battery now !

[niangsm]

v0.915016/UNI
CARD SERIAL: 00047122
Loaded 51 flash descriptors
llbug: port 4 open error: "Le fichier spécifié est introuvable"
FAILED TO SETUP PHONE
Elapsed: 0 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
supported phone was not detected
FAILED TO SETUP PHONE
PROCEDURE WAS STOPPED BY USER
Elapsed: 3 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
bootROM version: 0502
Locosto HS detected, booting...
ROMBoot not answering !
failed
FAILED TO SETUP PHONE
Elapsed: 25 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
bootROM version: 0502
Locosto HS detected, booting...
ROMBoot not answering !
failed
Can't load ID loader !
Elapsed: 15 secs.
Open COM port OK
FAILED TO SETUP PHONE
PROCEDURE WAS STOPPED BY USER
Elapsed: 82 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
bootROM version: 0502
Locosto HS detected, booting...
ROMBoot not answering !
failed
FAILED TO SETUP PHONE
Elapsed: 19 secs.

[InfinitySupport]

@niangsm
For sure you are in wrong thread. Please, next time post your messages in correct threads.

[Emmanuel Ankah]

Some unlock successfully but not all j132 so we need new update