hector bermudez
01-07-2009, 17:56
-- Security Bypass------------------------------------------------------------
Error : can not connect to Dream Box ( 7208 )
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 354270-01-283511-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Processing ... -Warning : Possibly wrong pin connected
\
Hint : Now the probe might be disconnected
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
same problem with 2 boxes version 3 12 firmware 1.16
Error : can not connect to Dream Box ( 7208 )
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 354270-01-283511-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Processing ... -Warning : Possibly wrong pin connected
\
Hint : Now the probe might be disconnected
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Error : Failed.
same problem with 2 boxes version 3 12 firmware 1.16