View Full Version : Software: zSiemenz Tools
zSiemenz Tools has these functions :
*) Flash reader/writer (including EEPROM)
*) Log (phone ID) reader
*) MAP Writer (not creator !)
*) EEPROM Block reader/writer
*) Off-line flash info tools (hidden)
Download the latest version from z-soft files area : http://groups.yahoo.com/group/z-soft/files/Siemens ...
Some ideas based on UniSiemens and Logger software and discussion in this forum, thank's to all.
Tested on M35, SL45, ME45 and M50 phone. Others are not tested yet...
RizaPN
lawrence
12-16-2002, 12:22
Thx
Nice, I will try it!
10x!!!!
hi rizaPN
the program you wrote looks very nice, but unfortunately it doesn't work for me.
it happens nothing, when i press the red button. tested under win98 and xp. sl45i fw55 slik. the cable is installed at com1
cable and phone tested with uni-siemens and worked.
ableeker
12-17-2002, 12:28
RizaPN,
Your program seems to work alright on an M35i! I've only tried the read functions, though, not the write functions. Looks pretty useful anyway.
One question, though. Do you have any idea why I have to remove the battery after using the program to read the flash? Unisiemens does the same thing. It's a bit annoying, and probably scary if you don't know this, as the phone seems totally dead (no software I know can read it anymore).
Keep up the good work!
Soft tested on different models on COM1 and COM2.
Pnones can't connect with any other soft work fine.
Not work for me!
thanks rizapn!
I try this tool,but not work for me.I have c 45 and usb cabel in port 3.(win xp)
I not try your software in other versions of windows.
Can you add options to config port(1,2,3,4,5..?)
This be nice!
Nice tool RizaPN..
Thanks
Thank's to All...
I did add one list to select COM Port to be used... Please give your new try...
RizaPN
Originally posted by rizapn
zSiemenz Tools has these functions :
*)
*)
*)
*)
*) Off-line flash info tools (hidden)
RizaPN
???
Debug mode ???
how to use this "hidden"
thanks
:)
*) Enter "FILE" in the edit field (left side of the DEBUG MODE display) : select Read Block function, and you will be able to read EEPROM block off-line using full-flash file ... select Read Flash function, and you will be able to get more info from your full-flash file, off-line (currently it is only CRCCheck location),
*) Leave that field blank, use as a normal zSiemenz, and you will be able to see some other respons from Siemens phone while zSiemenz communication (to add support for other models)
*) This zSiemenz is configurable through its INI file, to make it possible to support other untested model just by modifying that INI file, without touching its .exe.
RizaPN
Where I can download new ver 0.92
In Yahoo group only 0.91
Thanks!
Thanks rizapn for your work,this must be a nice program,but in my win xp don't work!
I try several times with siemens c 45,but no success!
Can other users post here if this work in the other win operating systems?
Thanks
Dark of Doom
12-19-2002, 09:10
got some problems:
i have an mt50,flash id:c489.
I cannot read eeprom/flash with your prog.,it stops download
at 4% for the eeprom,and about 16% for the flash.
Sometimes it recognises it as 8489,sometimes c489...
Maybe you could fix this little problem.
Writting back works fine,but i cannot read anything.
I tried to upload MAP file to m50....it stops at 28% everytime............
Dark of Doom
12-20-2002, 14:18
you've got a c489 module too ?
i'm using me45i (s45i040101)
Zsiemensz092 still not work :(
heeelppp
I have test only with my sl45 in read mode and for read flash is sensible like Unisiemens
Why in reading block don't make read of blocks in flash just before the eprom?
There are some block 6001, 6056......eccc.....that seems cache Wap.....same structure of table index block
Good Work rizapn! thanx! :)
Wind
pedjulino
12-29-2002, 04:17
I am try read flash v24 M35 and read is STOP on value 37%:(
regards
just curious, any chance of getting the source code or docs to the flash protocol? i'd like to port something like this under linux 'cause of being pissed with the constant problems with windows & their serial port issues etc.
I did write a small document about *simple* (yes, it is very-very simple explanation about) booting-process (in Bahasa Indonesia, of course based on my knowledge), in this site : http://groups.yahoo.com/group/z-soft/files ...
RizaPN