tecno pinout second cpu 6226 [Archive]

hans salim

01-10-2009, 09:58

i try to use pinfinder but only detect 6205,i cant find the 6226 cpu,i tried to use this pinout but in my body it show tx and rx both are gnd,any new pinout plz?http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=144396&d=1205144955

InfinitySupport

01-10-2009, 18:38

Hello,

I did not understand well.
What is connector type ?
What pins was detected already ?

hans salim

01-11-2009, 07:40

the pinout cpu detected with pinfinder 6205,i use 12C cable but in this cpu i tried complete formate to remove userlock but userlock still same,thats why i need help for 6226 pinout?

hans salim

01-12-2009, 05:29

@infinity team

any ideal for this tecno t880?

InfinityHelp

01-13-2009, 16:42

hello!

run pinfinder, detect 6205 pins, go to advanced settings and disable this two pins.
run pinout search again, this time it will stop on 6226 pinout

hans salim

01-13-2009, 17:58

plz where is advance setting? in pc or pifinder soft?

InfinityHelp

01-13-2009, 19:32

hello!

pinfinder advanced settings

hans salim

01-14-2009, 16:55

plz which setting i must untick bcoz i untick all setting in advance but still detect 6205 cpu?

InfinityHelp

01-17-2009, 18:06

hello!

please open pinfinder user manual on chapter 4 "advanced configuration" and learn how to disable 6205 pins from next search

Ramachandran NR

02-25-2009, 20:46

i try to use pinfinder but only detect 6205,i cant find the 6226 cpu,i tried to use this pinout but in my body it show tx and rx both are gnd,any new pinout plz?http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=144396&d=1205144955
This pinout is wrong. Rx should be Tx and Tx should be Rx

Burebista

03-06-2009, 11:11

Me to i've tried;second cpu is detected mt 6205 with rx-pin8 and tx-pin 7,i've disabled 8 and 7 pins in pinfinder search the cpu1 pinout again and again but no luck;pinout from picture doesn't work for cpu1.Anyone had a good pinout for fisrt cpui?Thanks and have a nice day!

InfinityHelp

03-07-2009, 00:01

Me to i've tried;second cpu is detected mt 6205 with rx-pin8 and tx-pin 7,i've disabled 8 and 7 pins in pinfinder search the cpu1 pinout again and again but no luck;pinout from picture doesn't work for cpu1.Anyone had a good pinout for fisrt cpui?Thanks and have a nice day!

hello!

try to increase "Finder activation tries" and repeat search

Burebista

03-07-2009, 11:43

I've increased/decreased "finder activation tried/finder power cyclies tries" and still the same problem;i belive also it's a hardware probleme because i've tried to format second cpu complete and i've encountered some errors.
All the best!