File flash for Hitech H-39

[Jocell_2]

i got a H-39 dead.
it is the first time for me flashing with Infinity box.
i've read full flash.
The serial is : U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN

in support area I find hitech H-39 file flash with serial : U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V03B59__HiTe ch-H39_16m_En_Id_Cn.B0M.bin.

Can I use this file??
Cause I can't find UPU25U26V04B27_Hitech-H39.
Thanks.

[InfinitySupport]

Hello,

You can use files with version similar to U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27

[Jocell_2]

hello MR,
i have flashed the phone, but it's still dead.
Here is the log:

COM10 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C19C:5E7C
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2B24C6C7.[U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN_C 21F7895].rpl
====================
New firmware detected:
U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 2B24C6C7
identification#1 protocol ver: 04
ver. sw1: U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN
ver. sw2: UPU25U26V04B27, 6A87E03D
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[U26_06B_PCB01_GPRS_MT6226_S01.UPU25U26V04B27.BIN]_20090113-154907.B0E.bin
flash: EC257E25082501:2AEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area (code #1) calculation...
done
detecting security area (code #2)...
security area (code #2) is absent
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_2B24C6C7_U26_06B_PCB01_GPRS_MT6226_S01.U PU25U26V04B27.BIN_C21F7895_20090113-154934.B0X.bin
Area: Firmware
flash: EC257E25082501:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_2B24C6C7_U26_06B_PCB01_GPRS_MT6226_S01.U PU25U26V04B27.BIN_C21F7895_20090113-155513.B0X.bin
Finished, time used: 513 sec
Remove/Install battery now !

Need help please. Thanks

[InfinityHelp]

hello!

there can be only two reasons for this:
either this firmware is not suitable for your phone or this phone has damaged hardware