s211 alcatel unlock done

[nadirghazi]

COM5 [VCP0] selected
module v1.30
Device: Alcatel-S211
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data ...
reading Alcatel-S211_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Alcatel-S211_eeprom_calibration-1_20090111-235936.80E.bin
Read data done
Check data ...
Check data done
Write ...
.........
.........
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Write done
Finished, time used: 78 sec

[mujahid_ali]

==== log opened: [1/12/2009 10:41:03 PM] ====
Application: C:\Program Files\InfinityBox\HModule\HModule.exe
Loading data, wait...
[Infinity Box] v1.23
S/N:
Wait...
Current model: Alcatel-S211
Done
COM4 [VCP1] selected
Device: Alcatel-S211
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
203125
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
reading Alcatel-S211_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Alcatel-S211_eeprom_calibration-1_20090112-224225.80E.bin
Read data done
Check data...
Check data done
Writing...
.........
.........
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Writing done
Finished, time used: 79 sec
Remove/Install battery now

[InfinitySupport]

Thank you very much for test report !

Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works and what is
possible problems (so we will be able to fix it) and successfully done work.

[mk_17]

can u tell us which way used cable or ... rx tx

[nadirghazi]

can u tell us which way used cable or ... rx tx


use 7310 zte cable..
pinfiner or spider man:)

[InfinitySupport]

can u tell us which way used cable or ... rx tx
Hello,

Here is an instruction how to get cable/pinout information:

1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout (Rx/Tx/Gnd pins and other information)

Here is an example of information given by Infinity-Box Shell:

http://www.infinity-box.com/download/public/Infinity-Box_shell_v126.jpg

Here is information how to build your own cable:
http://www.gsmhosting.com/vbb/showthread.php?t=342807