sagem 226(vodafone)unlocked

[kevin182029]

http://i293.photobucket.com/albums/mm79/kevin182029/untitled-1.jpg

COM6 [VCP0] selected
module v1.53
Device: Sagem-my226
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
sw version: EBI_IS_141107_1557 141107_1557 EBI_IS Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-sta_20090112-164514.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-sec_20090112-164525.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-complete_20090112-164533.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 126 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678


keyboard UP
-----------------
1 .................16

1 - GND
7 - Rx
8 - Tx

[InfinitySupport]

Hello,

You can use latest Pana01 update and unlock phone directly without entering a code.

[tungeshkumar]

i make same thing but not done unlocking.

it is asking code i enter 12345678 but not take

[InfinitySupport]

i make same thing but not done unlocking.

it is asking code i enter 12345678 but not take

Hello,

Just download and install latest updates from Infginity-Box support area and unlock phone directly without entering any codes just in seconds.

[anuja]

iCOM4 [VCP0] selected
module v1.63Device: Vodafone-226
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
loading...
error: can't run preloader: 01
middle part...
error: can't run middle loader:
Finished, time used: 8 sec
Remove/Install battery now

[tungeshkumar]

s that is ready vadofone 226 unloking done