Alcatel V570 Dead By Unlock

[Nasmi]

Hi Mates

On today i tried to unlock Alcatel V570 with Infinity and flash with this file
( V570X-2HRGFR1_XD74CA01_JRD25_06B_PCB01_GPRS_MT6225_S00[1].MAUI_06B_W07_28_SP1_V34_2008-09-28_En_Fr_Es_It_De.B0M.bin )

but phone dead and wont switch on

the log is below, please help me.
I am in urgent to return the phone to customer.


==== log: [1/12/2009 3:02:05 PM] ====
COM8 selected
module v2.60
Device: Alcatel-V770X, V770A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:D803:A00D
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: D:\Program Files\InfinityBox\MModule\backup_security\id.8BC80 AFE.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_A8B79B37].rpl
identification#1 detection finished
device-id: 8BC80AFE
identification#1 protocol ver: 05
ver. sw 1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw 2: MAUI.06B.W07.28.SP1.V34, C8644857
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
original imei: 35402902013893
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
security area (code #1) calculation...
done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150245.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
error: can't detect security area (code #3, part #2) version
Write Done
Finalization ...
Finalization Done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150327.B0X.bin
Finished, time used: 79 sec
Remove/Install battery now !

Thank you
NAsmi

[InfinitySupport]

Hello,

1. check model selection
2. there is no simfree V570 files in support area yet

[Nasmi]

Hello,

1. check model selection
2. there is no simfree V570 files in support area yet

Thanks For the reply, but i dont need to unlock the phone and need only to alive the phone again,

please help me to switch on the phone.

thank you.
nasmi

[InfinitySupport]

Hi Mates

On today i tried to unlock Alcatel V570 with Infinity and flash with this file
( V570X-2HRGFR1_XD74CA01_JRD25_06B_PCB01_GPRS_MT6225_S00[1].MAUI_06B_W07_28_SP1_V34_2008-09-28_En_Fr_Es_It_De.B0M.bin )

but phone dead and wont switch on

the log is below, please help me.
I am in urgent to return the phone to customer.


==== log: [1/12/2009 3:02:05 PM] ====
COM8 selected
module v2.60
Device: Alcatel-V770X, V770A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:D803:A00D
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: D:\Program Files\InfinityBox\MModule\backup_security\id.8BC80 AFE.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_A8B79B37].rpl
identification#1 detection finished
device-id: 8BC80AFE
identification#1 protocol ver: 05
ver. sw 1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw 2: MAUI.06B.W07.28.SP1.V34, C8644857
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
original imei: 35402902013893
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
security area (code #1) calculation...
done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150245.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
error: can't detect security area (code #3, part #2) version
Write Done
Finalization ...
Finalization Done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150327.B0X.bin
Finished, time used: 79 sec
Remove/Install battery now !

Thank you
NAsmi

Hello,

1. please, read my previous message carefully
2. check model selection and flash phone again

[quimera]

I also have a problem with a V770 Digitel of which had already been several but I get a 3 days and will enter the flash simfree here to unlock the flash income smooth but when you turn on the power but not me sample image on the screen and I get all FLAS support and some do not turn on me and left me with the other in standby mode to please assist me with this prolbema greetings

[InfinitySupport]

Hello,

What files you have used ?
What MModule version you have used ?

[Nasmi]

Hello,

What files you have used ?
What MModule version you have used ?

hi

here are the details


flash file = V570X-2HRGFR1_XD74CA01_JRD25_06B_PCB01_GPRS_MT6225_S00[1].MAUI_06B_W07_28_SP1_V34_2008-09-28_En_Fr_Es_It_De.B0M.bin

mmodule = 2.60


thanks
nasmi

[InfinitySupport]

Hello,

Did you tried to flash phone again with correct model selection ?
Post here operation log.

[Nasmi]

Hello,

Did you tried to flash phone again with correct model selection ?
Post here operation log.

HI Sir,

Here is the log below for your kind considaration,

==== log: [1/12/2009 3:02:05 PM] ====
COM8 selected
module v2.60
Device: Alcatel-V770X, V770A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:D803:A00D
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: D:\Program Files\InfinityBox\MModule\backup_security\id.8BC80 AFE.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_A8B79B37].rpl
identification#1 detection finished
device-id: 8BC80AFE
identification#1 protocol ver: 05
ver. sw 1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw 2: MAUI.06B.W07.28.SP1.V34, C8644857
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
original imei: 35402902013893
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
security area (code #1) calculation...
done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150245.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
error: can't detect security area (code #3, part #2) version
Write Done
Finalization ...
Finalization Done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150327.B0X.bin
Finished, time used: 79 sec
Remove/Install battery now !


Thank you
Nasmi

[InfinitySupport]

HI Sir,

Here is the log below for your kind considaration,

==== log: [1/12/2009 3:02:05 PM] ====
COM8 selected
module v2.60
Device: Alcatel-V770X, V770A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:D803:A00D
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22442200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: D:\Program Files\InfinityBox\MModule\backup_security\id.8BC80 AFE.[JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN_A8B79B37].rpl
identification#1 detection finished
device-id: 8BC80AFE
identification#1 protocol ver: 05
ver. sw 1: JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_28_SP 1_V34.BIN
ver. sw 2: MAUI.06B.W07.28.SP1.V34, C8644857
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
original imei: 35402902013893
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
security area (code #1) calculation...
done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150245.B0X.bin
Area: Firmware
flash: 01227E22442200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
error: can't detect security area (code #3, part #2) version
Write Done
Finalization ...
Finalization Done
file saved: D:\Program Files\InfinityBox\MModule\backup_security\system_l og_8BC80AFE_JRD25_06B_PCB01_GPRS_MT6225_S00.MAUI_0 6B_W07_28_SP1_V34.BIN_A8B79B37_20090112-150327.B0X.bin
Finished, time used: 79 sec
Remove/Install battery now !


Thank you
Nasmi

Hello,

Please, check RED color text carefully.
We have spent 8 (eight) days.
You can not select correct model. Why ?

[XTS3000]

hi

here are the details


flash file = V570X-2HRGFR1_XD74CA01_JRD25_06B_PCB01_GPRS_MT6225_S00[1].MAUI_06B_W07_28_SP1_V34_2008-09-28_En_Fr_Es_It_De.B0M.bin

mmodule = 2.60


thanks
nasmi


better use chinese miracle , yr alcatel is mtk cpu chip.


br,

[InfinitySupport]

Hello,

It is need to use MModule for Alcatel models due to some special algorithms is included in MModule for this type of phones.

[bamogil]

hello i got one v570(from orange france) that i was able to buy code and unlock. is it possible to copy it and unlock other using infinity? THANKS

[InfinitySupport]

Hello,

It's not possible at the moment.

[quayson81]

I tried unlocking Alcatel V570. I read file before any operation so i the file read and the file is V570X-2HRGFR1_XD74CA01_JRD25_06B_PCB01_GPRS_MT6225_S00[1].MAUI_06B_W07_28_SP1_V34_2008-09-28_En_Fr_Es_It_De.B0M

bur i cant reflash the phone nack with this file. I used file in forum or infinity support page but still phone cant power on. What should i do? Anybody here to help me bring this phone back to life?

Thanks:eek:

[InfinitySupport]

Hello,

Did you tried to make "format ffs" ?

[quayson81]

I have re-flashed phone again and its now working but i did fix security area and selected slowest speed to flash it. Now phone is working but i cant unlock it. Does infifnity support Alcatel V570 unlocking?