KG-110 dead after flash

[aminnovelty]

Dear supporter ineed to change imei of kg-110 and for this purpose i made a post to you and in the reply , i got instruction for flashing. I download necessary code and flashed it ,result phone is completly dead.


Device: LG-KG110
Checking data, wait...
advanced flash detection enabled
Action: flash write
Write: Firmware (code)
Skip: File system
Write: Alchemy data
Skip: Eeprom
"smart write" active
"keep calibration" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:D1912200000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current otp imei: 35269108331355
file saved: C:\Program Files\InfinityBox\LGA\eeprom__LG-KG110_20090113-194427.B1E.bin
................................
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write: Firmware (code)
flash: 01227E22212200:D1912200000000
Write: Alchemy data
flash: 01227E22212200:00000100000000
write: 2nd chip area
Write Done
Finished, time used: 1009 sec
Remove/Install battery now !

anybody can guide me how to alivi it ?

[InfinitySupport]

Hello,

What was with phone before flash ?

[aminnovelty]

Sir just want to change IMEI no only but let me clear imei was not in ????? form was in perfect digits but due to some problem customer want to change imei of another 15 digits.

[InfinitySupport]

@tarana3263635
if you have nothing good to say it's better to be silent.
your offtopic message was deleted.

@aminnovelty
Check phone battery voltage, charge battery.
Phone can not be dead after full flash operation.

[aminnovelty]

Respected sir still on same position infact i have wash it properly but result is still dead. Sir can i write this phoine again with some other BIN + ALCHEMY DATA file?

[aminnovelty]

@tarana3263635
if you have nothing good to say it's better to be silent.
your offtopic message was deleted.

@aminnovelty
Check phone battery voltage, charge battery.
Phone can not be dead after full flash operation.

Sir could it be any problem of EEPROM file which is save ? Should i write it seperatly?

[InfinitySupport]

Hello,

You can try to use other code/alchemy files and eeprom files.
Also I suggest you to check phone hardware.
Do not forget to check battery voltage.

[aminnovelty]

Hello,

You can try to use other code/alchemy files and eeprom files.
Also I suggest you to check phone hardware.
Do not forget to check battery voltage.

thanks a lopt for your kind replies i have finish my phone successfully but with some another method, here is log-:


module v1.36
Device: LG-KG110
Checking data, wait...
advanced flash detection enabled
Action: flash write
Write: Firmware (code)
Skip: File system
Skip: Alchemy data
Skip: Eeprom
"smart write" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:D1912200000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current otp imei: 35269108331355
file saved: C:\Program Files\InfinityBox\LGA\eeprom__LG-KG110_20090116-101352.B1E.bin
........
version: 404-XXV10g91KG110P40FL
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write: Firmware (code)
flash: 01227E22212200:D1912200000000
flash: 01227E22212200:00000100000000
write: 2nd chip area
Write Done
Finished, time used: 1330 sec
Remove/Install battery now !


I just FULL FLASH the phone according to given instruction HOW TO FULL FLASH , and my phone is quite ready besides i would like to note u that its IMEI has also changed as you can see into log. Thanks a lot again.

[InfinitySupport]

Hello,

I am very glad to hear about good results.
Also very glad to hear that manual reading gives you an information how to flash phone correctly.

[a.w.m.wafaz]

try thees method Full flash & SP Unlock 100000000000000000000000% working
+94755327898
a_wafaz@yahoo.com