infinity cable

[KARK_07]

:Di have a cable of infinity box pinfinder (L5A) not working..
anyone can help me to repair or to modified of this, pls..
i been try to change the connector but still.
only these cable not working..
pls help mga bosing
tanx:D

[InfinitySupport]

Hello,

Please, check PinFinder manual page-20 first.

also all information about PinFinder cables can be found in manual (see last pages).

[.:Zogaib:.]

I have problems with the cable L5A too, do not find the Pinout of any phone.
I tried on more than 8

[deepakgarg]

I have problems with the cable L5A too, do not find the Pinout of any phone.
I tried on more than 8
just follow instructions over here
http://forum.gsmhosting.com/vbb/showpost.php?p=4053877&postcount=2

[.:Zogaib:.]

1- The box is conected directly to PC USB port, don't use any kind of USB-hubs
2- The “Power” wires connected correctly
3- The connector is completely inserted
4- The contacts is clean
5- The buttom not is demaged (the phone is new)
6- In PCB not have TX and RX printed
7- The connector contacts not cutted internally
8- The phone not have TX and RX
9- the cable not have wire in pin 9 of conector for cut according to picture



witch other cables the pinou is are found normally

[deepakgarg]

1- The box is conected directly to PC USB port, don't use any kind of USB-hubs
2- The “Power” wires connected correctly
3- The connector is completely inserted
4- The contacts is clean
5- The buttom not is demaged (the phone is new)
6- In PCB not have TX and RX printed
7- The connector contacts not cutted internally
8- The phone not have TX and RX
9- the cable not have wire in pin 9 of conector for cut according to picture



witch other cables the pinou is are found normallyu can find pinouts with other cables????or not

[.:Zogaib:.]

yes... it works normally with other cables, but witch L5a not find pinout.

already bought another cable L5A and also did not work

[InfinitySupport]

Hello,

In most cases Chinese phones with L5A cable has Rx/Tx points at phone PCB, you need to open phone and check it's PCB.

[.:Zogaib:.]

hello Mr. InfinitySupport

I open the phone and do not have Tx/Rx points.


In other models I found the local form indicating the Tx and Tx, but few that have this indication

[InfinitySupport]

Hello,

If pinout for 5-pin connector can not be found automatically you can check where is GnD and CHARGE pins at phone connector (ordinary it's pin-1 and pin-5) and you can try to use rest three pins as Rx/Tx.