Execte "Security Bypass" Operations Stage 2 error

[pa lonely]

How to repai GDFS by dreambox Stage 2 error

-- Reading Info---------------------------------------------------------------
User selected phone Z610 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-776615-6
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 51
Hint : Now the probe might be disconnected
Processing ... Warning : Possibly wrong pin connected
Hint : Now the probe might be disconnected
Processing ... Warning : Possibly wrong pin connected
Hint : Now the probe might be disconnected
Processing ...
Flash Chip : Intel 48F50xxM0Y0
Flash Chip ID : 887E0089

Done.

--- Security Bypass------------------------------------------------------------
User selected phone Z610 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-776615-6
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 51
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

[swensonb]

mate try to press on/off switch when connecting TP 2 always work for me ...

post results...

regards
swensonb
DBSS USER

[GSM Dream]

Hello!
Looks like wring testpoint pin.

[Chevka]

@pa lonely
1. try to WRITE GDFS first with Testpoint access mode. (its only require testpoint stage 1)
2. Execute security Bypass using Testpoint access mode. if all okay with TP1 and TP2 then...
3. change the access mode to security bypass and click unlock and repair GDFS.