View Full Version : 6310i v5.10 Flashing problem
I flashed my 6310i (with cheap dct4 flasher) with v5.10 patched and the phone worked but the Bluethoot was blocked....
Then i re flashed with V4.80 and when i turn on the phone, the phone ask to me one restriction code (showing: some restriction are on please put in restriction code).
I turn off the phone and then when i turn on the phone CONTACT SERVICE! Grrrrrr!!!
I try to reflash it with v5.10 but nothing! This **** CONTACT SERVICE dont go! I tried F-bus by maestro but nothing ....
Whats Hell I can Do?
I appreciate all suggestions!
Ciao Alex
johan8210
12-24-2002, 14:48
I had the same. First downgrade to v4.80. Then you need to get the phone in test mode. Then you have to unlock the phone with JIC unlocker. The phone is now simlockfree and no CS anymore. Now you can upgrade the phone to v5.10 (and later to v5.22).
The problem I had was that I couldn't get the phone in test mode. I hadn't a F-bus cable. With Neelix II it wasn't any problem. Only remove simlock and the phone works.
@xxxpaga,
Even if you can revive your phone with cheap DCT4 Flasher, your BT will not work... BUt use N2 to reinstall BT, it will be fine..
BR,
Epic
Victor the
12-24-2002, 17:32
Before I did the same as yours.Just reflash again with the same mcu 510,(don't take out the cable,leave it in local mode) and then Reset lock.
Good luck:)
karamusa
12-25-2002, 13:05
what hardware and software di you use to flash your fone
@xxxpaga,
contact me on icq !!
br
peter;)
I use dct4 premium by gsmtweack and cheap chinese box.
karamusa
12-26-2002, 18:43
i brought a Nokia DCT 4 MCU/PPM flasher so that i could unlock 8310 v5.57 and other new version that cant be unlocked e.g 6310, 6510, 3510, 7210 etc i tried to unlock a 8310 v5.57 so i tried to down grade it to v5.55 but i get a message shown below and i cant down grade it.
no loader for this flash,or model [0x0001257E] - 0x0120
I try to re-flash with v4.80 and v5.10 and when the phone goes in local mode i leave and try to reset lock but i receive SP command error and when i try to reset locks when phone show contact service the software read imei, phone version and then write :communication error...... what's hell
Please help me
And i try jic unlocker but software dont see the phone, i try to put it in test mode with wire and phone show test mode but jic dont connect phone! why?
hi, problem solved!!
I downgraded phone to 4.80 and then i put in test mode with one wire and use unlock/fix button of dct4flasher and phone work ok but bluethoot don't work!
then i downgrade phone to v4.08 and push unlock/fix and now bluethoot work ok!!!
karamusa
12-26-2002, 19:59
updated the Fia files now i get a message shown below
access violation at address 0043C54F in module 'XP.EXE'. Read of address 03A18008.
use windctv2.0, or pro flasher....
they can revive ur bt.....
Hi, where can i download windctv2.0 and pro flasher? can you send to me?
my e-mail is xxxpaga@inwind.it
Victor the
12-28-2002, 05:47
download link windct & dct4 by pro
http://brad.gsmunlock.sk/index.php