OT-V212 Unlocked Success"

[..::Angel::..]

COM5 [VCP0] selected
module v1.30
Device: Alcatel-V212
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data ...
reading Alcatel-V212_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Alcatel-V212_eeprom_calibration-1_20090124-192926.80E.bin
Read data done
Check data ...
Check data done
Write ...
.........
.........
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Write done
Finished, time used: 79 sec
Remove/Install battery now !

[samirov-gsm]

Nice work...................

[InfinitySupport]

@..::Angel::..
Thank you very much for test report !

Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works and what is
possible problems (so we will be able to fix it) and successfully done work.

[saqibmalik]

unlock done ALCATEL OT_V212

COM14 [VCP0] selected
module v1.30
Device: Alcatel-V212
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data ...
reading Alcatel-V212_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Alcatel-V212_eeprom_calibration-1_20090126-161156.80E.bin
Read data done
Check data ...
Check data done
Write ...
.........
.........
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Write done
Finished, time used: 91 sec
Remove/Install battery now !

[bidz]

hi guyz can i ask what infinity cable did u use in unlocking the phone?

[shahzaadbutt]

here is your place for successfull stories
http://forum.gsmhosting.com/vbb/showthread.php?t=725574

[InfinitySupport]

hi guyz can i ask what infinity cable did u use in unlocking the phone?
Hello,

Here is an instruction how to get cable/pinout information:

1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout (Rx/Tx/Gnd pins and other information)

Here is an example of information given by Infinity-Box Shell:

http://www.infinity-box.com/download/public/Infinity-Box_shell_v126.jpg

Here is information how to build your own cable:
http://www.gsmhosting.com/vbb/showthread.php?t=342807