Sharp GX10 handset code

[MPS]

I have Sharp GX10 with handset code ??
It is possible to remove it ??

Please email me,
regards,
MPS Poland

[philter]

****EDIT JUST SEEN ORIGIONAL POST DATE!!! LOL SHUD CUM IN USE TO SOMEONE THO!******
I just got a GX10 Handset Locked phone today and my mate cant remember the code - Sharp n Vodafone helplines??? both said only way to sort it was to send it in for re-flash. Didn't belive them and asked for engineers code/sequence, but was told there wasnt one.
So I got in searched around and with in 5 mins got the following, AND IT WORKED!!! - Cheers 'unlockchips.com' from nokiafree.org.

FOLLOW THIS EXACTLY - START WITH NO SIM AND POWERED OFF!!


gx10i/gx10 security code

for all o have problems works 101%

full factory reset - clears EVERYTHING

Remove SIM

1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.

2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No:


4 Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5 Wait until all the above messages are displayed and then press the top right key.
6 Press the M key (very important). Message should display Diag Param Saving.
7 Press the red key to power down the phone

Again many thanks to ''unlockchips.com' from nokiafree.org - thought I was knackered cos charger connector block is brok - but this did it!!!
Nice 1!!!!

[Burnt Cobba]

if you used the search function you would have found this.....

http://forum.gsmhosting.com/vbb/showthread.php?t=152489

al

[philter]

I got solution from google!!!

[alfaalfa]

Instructions:
1. power on the clip
2. power on the phone
3. connect the phone to clip
4. press unlock button one time, wait until leds are solid and press second time.
5. when the leds are solid second time, remove and put back the phone battery
6.power on the phone- you can see XXXX on scren
7. press 1 ->99->top right button under screen
8. enter 3 for unlock or 1 for security code
9. press top right button again and wait until you can see the message
,,FINISHED-PLEASE ANY KEY,, for gx20 or similar for gx10..
10. press few times top right buton to power off the phone.

2-Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

3- Enter 99 and press the top right key. A message should be displayed saying Input Mode No:

4-Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5- Wait until all the above messages are displayed and then press the top right key.
6- Press the M key (very important). Message should display Diag Param Saving.
7- Press the red key to power down the phone

Note that you will loose ALL user data thoughy and you have to unlock the phone after also (if it has ever been locked).